- Joined
- Mar 8, 2020
- Messages
- 103
- Motherboard
- Asus ProArt X570-CREATOR WIFI
- CPU
- Ryzen 9 3900X
- Graphics
- RX 5700 XT
This might not be a good solution but it seems stable for now, no lags. I mean there is a bit of a slow start after password about 15-20s but then it's quite stable and no lags.
1. I've updated the system to 10.15.5 (the new update is out, went smooth with 3 restarts with OC)
I had fewer lags within the system at this point but Youtube was still messing around.
2. I changed in bios the following:
/AI Tweaker/
AVX Instruction Core Ratio Negative Offset: "8"
AVX-512 Instruction Core Ratio Negative Offset: "12"
CPU Core Ratio: Sync All Cores
Here are the temps:
Idle CPU temp 32-33°C
Under full load 70-72°C
Cinebench R20 is scoring higher from 7100 points when it was set to auto and no offsets, now to 8499 points.
Still under patched bios version 3101.
I will now give it a go with bios 2002 default settings in AI Tweaker
Ohh... that was a bit of time waste, downgrading to bios 2002 and removing SSDT-AWAC.aml
Is still lagging as hell. I'm switching back to bios patched 3101 with SSDT-AWAC.aml.
I think this is related to having sync all cores, for some reason, it likes it better like that. But bringing the slides high so I don't completely melt my CPU. If I have the offsets as KPG had them
AVX Instruction Core Ratio Negative Offset: "3"
AVX-512 Instruction Core Ratio Negative Offset: "2"
AVX-512 Instruction Core Ratio Negative Offset: "2"
My CPU is reaching 108°C during benchmark ) So yeah the higher I slide the numbers, the lower it pushes the CPU limit.