Contribute
Register

ASUS Vivobook S550CA

Status
Not open for further replies.
Thank you so much, it's all worked very well. Part 2 please if you would be so kind.

Just one problem, I can no longer boot directly into the HDD and must go through unibeast. It does not show up in the bios please help if you can.
 
Thank you so much, it's all worked very well. Part 2 please if you would be so kind.

Just one problem, I can no longer boot directly into the HDD and must go through unibeast. It does not show up in the bios please help if you can.

where you proceed with the installation? sdd , external , hdd ?
with the boot problem now I'm trying to resolve...
 
The internal HDD
 
I'm going to tell you how to do it in mail. leave here your mail.
Note: tonymacx rules , don't let me post here ...

Note that the rules do not allow discussing modifications to the OS X installer that allow MBR installation. But the rules do not preclude installing to GPT and converting the partition table from GPT to MBR after installation.

See here for a guide I wrote: http://www.tonymacx86.com/mountain-...e-i7-2600k-hd3000-ml-10-8-2-a.html#post520519 (GPT -> MBR conversion starts at step 16)
 
I'm going to tell you how to do it in mail. leave here your mail.
Note: tonymacx rules , don't let me post here ...

I'd rather not leave my email. Would it be possible for you to just private message me on here?
 
Note that the rules do not allow discussing modifications to the OS X installer that allow MBR installation. But the rules do not preclude installing to GPT and converting the partition table from GPT to MBR after installation.

See here for a guide I wrote: http://www.tonymacx86.com/mountain-...e-i7-2600k-hd3000-ml-10-8-2-a.html#post520519 (GPT -> MBR conversion starts at step 16)


Ok , thanks.

Wolvershigs You can do exactly what rehab man show in the guide.

Follow the steps from 16 to 22.
 
Thank you both so much, it is now booting perfectly into chimera. Pabloesco, may I have part 2?
 
Thank you both so much, it is now booting perfectly into chimera. Pabloesco, may I have part 2?

You need to do exactly what rehab man told me:
If you have HD4000 and your brightness don't work.

It comes for free when you implement backlight control:

HD3000/HD4000 Brightness Fix:
DSDT Patches from here: https://github.com/RehabMan/Laptop-DSDT-Patch

Apply:
"Rename GFX0 to IGPU"
"Brightness Fix (HD3000/HD4000)"
- rename patch must be done first and to all DSDT/SSDT that contain references to GFX0 that you're including in your final SSDT set
- Brightness patch must be done to the DSDT or SSDT that contains the definition for Device GFX0 (search for 'Device (GFX0)'
- Place DSDT and SSDT (if necessary) into a place where the bootloader will load them. For Clover, EFI/CLOVER/ACPI/patched (DSDT.aml, SSDT-x.aml where 'x' is a number). For Chameleon, /Extra/ssdt.aml, /Exra/ssdt-1.aml, /Extra/ssdt-2.aml, etc.

Install: https://github.com/RehabMan/OS-X-ACPI-Backlight

SOURCE: http://www.tonymacx86.com/mavericks-laptop-support/133530-time-machine-flash-player-3.html post number #4
 
Thanks for your help, would you happen to know how to get sound working?
 
Status
Not open for further replies.
Back
Top