Asus vivobook s300c

[mugen441]

this are my original acpi files and the ioreg, efi and output you asked before, i know you already helped me and i am really grateful-- i tried the usb patch for 7 series , i tought that it would solve that usb stuff you mentioned,
thanks for everything
cheers

 

[RehabMan]

this are my original acpi files and the ioreg, efi and output you asked before, i know you already helped me and i am really grateful-- i tried the usb patch for 7 series , i tought that it would solve that usb stuff you mentioned,
thanks for everything
cheers

You need to use the _PRW 0x0d patch. The DSDT you have in ACPI/patched is not patched with it.

 

[mugen441]

Installed this patch (even tough my usb3 is disabled) usb_prw_0x0d_xhc.txt to my dsdt and now sleep is working again!!!
THANKS REHABMAN! YOU ARE THE BEST!
thanks for all your guidance and patience i know im slow like a turtle
things to fix now (that i am aware of)

fix hdmi audio
and manage to boot with xhci on so fix usb3 too

cheers!
i will start writing a guide for this laptop

 

[RehabMan]

Installed this patch (even tough my usb3 is disabled) usb_prw_0x0d_xhc.txt to my dsdt and now sleep is working again!!!
THANKS REHABMAN! YOU ARE THE BEST!
thanks for all your guidance and patience i know im slow like a turtle
things to fix now (that i am aware of)

fix hdmi audio
and manage to boot with xhci on so fix usb3 too

cheers!
i will start writing a guide for this laptop

http://www.tonymacx86.com/threads/guide-intel-igpu-hdmi-dp-audio-sandy-ivy-haswell-broadwell.189495/

http://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/

 

[mugen441]

hi!!!,still using the same computer, recently updated to 10.12.6, cus i got an ssd , everything working, but sleep,. hdmi audio, fine brightness, sound, touchpad , usb, and i been trying to patch the dsdt with the old usb_prw_0x0d_xhc.txt but it gives me a kp , no way to apply it, tried a lot, when i compile it it says it has 1 error , i change the one XHC1 to XHC and then it compiles good, but give me the kernel panic im talkin about, will post pictures soon, thanks!

 

[RehabMan]

hi!!!,still using the same computer, recently updated to 10.12.6, cus i got an ssd , everything working, but sleep,. hdmi audio, fine brightness, sound, touchpad , usb, and i been trying to patch the dsdt with the old usb_prw_0x0d_xhc.txt but it gives me a kp , no way to apply it, tried a lot, when i compile it it says it has 1 error , i change the one XHC1 to XHC and then it compiles good, but give me the kernel panic im talkin about, will post pictures soon, thanks!

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[mugen441]

Will do as you request, not in my home right now, this is a capture of the kernel panic when i apply the patch i mention before, cheers!

 

[RehabMan]

Will do as you request, not in my home right now, this is a capture of the kernel panic when i apply the patch i mention before, cheers!

You need to attach the EFI/Clover that corresponds.

 

[mugen441]

the requested efi

 

[RehabMan]

the requested efi

Your config.plist is a mess (I didn't check anything else).
See guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/