Asus TUF FX504GD, "Architecture couldn’t be recognized! PMC_BOOT_0 = <ptr>, PMC_BOOT_42 = 0x00000013" and "Service exited with abnormal code: 1"

[rrcn08]

Hello,
This is my second device trying to install Hackintosh to. I have attached the necessary CLOVER folder, and the screens of my bios in the zip file.
The config.plist I use is a mix of configuration from the RehabMan's laptop guide and PoomSmart's TUF Guide at GitHub.
I have also attached a dxdiag log of my system config in the zip.

Specs:

Model: TUF GAMING FX504GD_FX80GD
Processor: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (8 CPUs), ~2.3GHz
Memory: 8192MB RAM
Available OS Memory: 8048MB RAM

---------------
Display Devices
---------------
Card name: Intel(R) UHD Graphics 630
Manufacturer: Intel Corporation
Chip type: Intel(R) UHD Graphics Family
DAC type: Internal
Device Type: Full Device (POST)
Dedicated Memory: 128 MB
Native Mode: 1920 x 1080(p) (60.052Hz)

Card name: NVIDIA GeForce GTX 1050
Manufacturer: NVIDIA
Chip type: GeForce GTX 1050
DAC type: Integrated RAMDAC
Device Type: Render-Only Device
Dedicated Memory: 4021 MB

For more information on the device, you can check the zip attached below.
Thanks. <3

 

[Feartech]

Hello,
This is my second device trying to install Hackintosh to. I have attached the necessary CLOVER folder, and the screens of my bios in the zip file.
The config.plist I use is a mix of configuration from the RehabMan's laptop guide and PoomSmart's TUF Guide at GitHub.
I have also attached a dxdiag log of my system config in the zip.

Specs:

Model: TUF GAMING FX504GD_FX80GD
Processor: Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz (8 CPUs), ~2.3GHz
Memory: 8192MB RAM
Available OS Memory: 8048MB RAM

---------------
Display Devices
---------------
Card name: Intel(R) UHD Graphics 630
Manufacturer: Intel Corporation
Chip type: Intel(R) UHD Graphics Family
DAC type: Internal
Device Type: Full Device (POST)
Dedicated Memory: 128 MB
Native Mode: 1920 x 1080(p) (60.052Hz)

Card name: NVIDIA GeForce GTX 1050
Manufacturer: NVIDIA
Chip type: GeForce GTX 1050
DAC type: Integrated RAMDAC
Device Type: Render-Only Device
Dedicated Memory: 4021 MB

For more information on the device, you can check the zip attached below.
Thanks. <3

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

try setting DVMT to 128MB if your screen resolution is over 1920x1080

drivers64UEFI is wrong, too many files in there

AppleALC.kext doesn't belong in clover, remove that

also use a config.plist from the laptop guide untouched

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

make sure to use latest version of clover via sourceforge

 

[rrcn08]

Okay, Thanks.
I replaced the config.plist from the guide without any modification, and removed AppleALC.kext.
It started working. I am booted, but my trackpad isn't working.
The model is I2C ELAN1200 Precision TouchPad (pci8086,a368). Thank you again.

 

[Feartech]

Okay, Thanks.
I replaced the config.plist from the guide without any modification, and removed AppleALC.kext.
It started working. I am booted, but my trackpad isn't working.
The model is I2C ELAN1200 Precision TouchPad (pci8086,a368). Thank you again.

VoodooI2C Help and Support

This thread is intended for users of VoodooI2C to get support for using the kext on their system. What is VoodooI2C? VoodooI2C is a project consisting of macOS kernel extensions that add support for I2C bus devices. The project is split into two main components: the core extension and various...

www.tonymacx86.com

 

[rrcn08]

I have tried that guide, but the kexts would not even load.

 

[yousef.bablle]

This file and images

 

[Feartech]

This file and images

enable these in your config.plist:

<key>Fixes</key>
            <dict>
                <key>Comment-IRQ Fix</key>
                <string>The following fixes may be needed for onboard audio/USB/etc</string>
                <key>FixHPET</key>
                <false/>
                <key>FixIPIC</key>
                <false/>
                <key>FixRTC</key>
                <false/>
                <key>FixTMR</key>
                <false/>
            </dict>

also make this:

<key>PciRoot(0)/Pci(0x1f,3)</key>
            <dict>
                <key>#hda-gfx</key>
                <string>onboard-1</string>
                <key>#layout-id</key>
                <integer>3</integer>
                <key>#no-controller-patch</key>
                <integer>1</integer>
            </dict>

look like:

<key>PciRoot(0)/Pci(0x1f,3)</key>
            <dict>
                <key>hda-gfx</key>
                <string>onboard-1</string>
                <key>layout-id</key>
                <integer>3</integer>
                <key>no-controller-patch</key>
                <integer>1</integer>
            </dict>

 

[yousef.bablle]

Can you modify the file and send it because I am not a very expert like you
And you very much

 

[Feartech]

Can you modify the file and send it because I am not a very expert like you
And you very much

nope

 

[yousef.bablle]

Can you explain to me how I can edit it