Contribute
Register

Asus PRIME Z490-P Catalina 10.5.5

Joined
Jun 30, 2021
Messages
1
Motherboard
Asus Prime 490-P
CPU
i7 10700K
Graphics
rx 5500 XT
Hello,

The EFI from this post worked great for me, including my video card (Radeon RX 5500 XT 8 GB)

However, audio is not working from either the soundcard or over HDMI. I have tried different alcpi layouts but not had any luck. Has anyone got any advice? i'm almost there bar having no sound.

I've attached the output of a lshw command entered under Linux to give you an overview of my hardware.
 

Attachments

  • lshw.txt
    24.3 KB · Views: 16

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
15,790
Motherboard
Gigabyte Z490 Vision D
CPU
i5-10400
Graphics
RX 580
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Hello,

I try to build a Hackintosh with OpenCore (first time with OC).
Hardware : Intel I9-10850K, Asus Z490-P, 64GB RAM, Samsung SSD, Corsair Carbide box, Intel HD 630 integrated Graphics, IIYAMA Gold Phoenix Display.
Software : OC 0.6.8 (Debug flavor), to install Catalina 10.15.5

I peek and poke a lot of infos here and there to fill up the EFI partition coherently, and build the config.plist file, but to no avail.
I am currently stuck at installing OC on my box, and I don't even know why. Indeed, the stage where the boot hits the wall is so generic that I don't clearly find the escape lane: after a few minutes of loading, the thing is halting and displays the ugly "prohibited sign". And this is not actually specific of a misconfiguration, IMHO.

In the end of the day, I decided to ask for some help on this forum.
I'm not even able to provide a useful log file for this crash.

Could one of you, definitely more expert than me, take a look at my stuff, and point me to what could be wrong ?
I attach here the EFI folder and the config.plist file.

Please ask for more details/infos if required...

Many Thanks, Regards, G.G.
At the OpenCore Picker, press and release CMD-V to enable Verbose Logs. Then boot the macOS installer and you will see a lot of log messages. When the activity stops, you may post a photo (but reduce it to about 1-2 MB).

Is CFG-Lock (or MSR 0xE2) disabled in BIOS?
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
15,790
Motherboard
Gigabyte Z490 Vision D
CPU
i5-10400
Graphics
RX 580
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac Pro
Classic Mac
  1. Quadra
Mobile Phone
  1. iOS
Hello,

The EFI from this post worked great for me, including my video card (Radeon RX 5500 XT 8 GB)

However, audio is not working from either the soundcard or over HDMI. I have tried different alcpi layouts but not had any luck. Has anyone got any advice? i'm almost there bar having no sound.

I've attached the output of a lshw command entered under Linux to give you an overview of my hardware.
Please try this 2-step procedure:
  • Copy the two FakePCIID kexts to OC/Kexts folder and add references to them in Kernel section of config.plist.
Screen Shot 2021-06-30 at 4.52.10 AM.png
  • Create a new DeviceProperties entry for the on-board sound controller as shown.

Screen Shot 2021-06-30 at 4.48.51 AM.png
  • Reboot and check HDMI audio again.
 

Attachments

  • FakePCIID.zip
    13.2 KB · Views: 13
Joined
Apr 22, 2014
Messages
28
Motherboard
Intel NUC8i7BEH
CPU
i7-8559U
Graphics
Iris Plus 655
Mac
  1. MacBook Pro
  2. Mac mini
Mobile Phone
  1. iOS
Hello,

I try to build a Hackintosh with OpenCore (first time with OC).
Hardware : Intel I9-10850K, Asus Prime Z490-P mobo, 64GB RAM, Samsung SSD NVMe M2.1, Corsair Carbide box, Intel HD 630 integrated Graphics, IIYAMA Gold Phoenix Display.
Software : OC 0.6.5 (Debug flavor), to install Catalina 10.15.5

I peek and poke a lot of infos here and there to fill up the EFI partition coherently, and build the config.plist file, but to no avail.
I am currently stuck at installing OC on my box, and I don't even know why. Indeed, the stage where the boot hits the wall is so generic that I don't clearly find the escape lane: after a few minutes of loading, the thing is halting and displays the ugly "prohibited sign". And this is not actually specific of a misconfiguration, IMHO.

In the end of the day, I decided to ask for some help on this forum.
I'm not even able to provide a useful log file for this crash.

Could one of you, definitely more expert than me, take a look at my stuff, and point me to what could be wrong ?
I attach here the EFI folder and the config.plist file.

Please ask for more details/infos if required...

Many Thanks, Regards, G.G.

Hello,

With help from CaseyJS (Thanks), I have now been able to install and run almost correctly this build.
Switched back for the time being to OC 0.6.5.

However, I still have several issues with it :
- Built in Ethernet (Controller RealTekRLT8111H) does not work. Network Preferences displays 'Cable not connected' for en0. I used a WiFi dongle up two now.
- I try to connect a Samsung EVO 850 SSD through USB to test it before installing it more permanently in the box, but this SSD is not seen either
- I am in trouble with "displaysleepnow" because it does not work either (the display is restarting as soon as it begins to sleep)
- I was unable to make OpenCanopy working, and, even if this is only a cosmetic, it will allow me to make less mistakes.

I attach several files to this post to help for debugging (ran with csr config disabled):
- the EFI folder
- the log file extracted thru "log show --predicate 'processID == 0' --debug" named "log_210721_3.list.zip"
- Two log files extracted with Hackintool "logs" tab, one about "Boot", and one about "System"
- at last, the log file written by OC itself inside of the EFI folder at boot time

Hope these help for debugging/understanding. If more is required, please ask.

Could someone provide me with some hint about any of these issues, please ?

Many Thanks, Regards, G.G.
 

Attachments

  • EFI.zip
    7.7 MB · Views: 26
  • log_210721_3.list.zip
    34.2 KB · Views: 7
  • opencore-2021-07-21-134305.txt.zip
    12.1 KB · Views: 7
  • Hackintool_Boot_log.rtf.zip
    27.5 KB · Views: 7
  • Hackintool_System_log.rtf.zip
    66.2 KB · Views: 7
Last edited:
Joined
Jul 2, 2021
Messages
51
Motherboard
Asus prime Z490-P
CPU
i5-10400
Graphics
UHD 630
Mac
  1. iMac
Mobile Phone
  1. Android
Hello,

With help from CaseyJS (Thanks), I have now been able to install and run almost correctly this build.
Switched back for the time being to OC 0.6.5.

However, I still have several issues with it :
- Built in Ethernet (Controller RealTekRLT8111H) does not work. Network Preferences displays 'Cable not connected' for en0. I used a WiFi dongle up two now.
- I try to connect a Samsung EVO 850 SSD through USB to test it before installing it more permanently in the box, but this SSD is not seen either
- I am in trouble with "displaysleepnow" because it does not work either (the display is restarting as soon as it begins to sleep)
- I was unable to make OpenCanopy working, and, even if this is only a cosmetic, it will allow me to make less mistakes.

I attach several files to this post to help for debugging (ran with csr config disabled):
- the EFI folder
- the log file extracted thru "log show --predicate 'processID == 0' --debug" named "log_210721_3.list.zip"
- Two log files extracted with Hackintool "logs" tab, one about "Boot", and one about "System"
- at last, the log file written by OC itself inside of the EFI folder at boot time

Hope these help for debugging/understanding. If more is required, please ask.

Could someone provide me with some hint about any of these issues, please ?

Many Thanks, Regards, G.G.
hey bro
I use the same Mobo z490-p
high sierra
working hdmi I don't know how to get the usb ports working
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
23,286
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
hey bro
I use the same Mobo z490-p
high sierra
working hdmi I don't know how to get the usb ports working
usb guide is here:
 
Joined
Nov 12, 2020
Messages
12
Motherboard
ASUS PRIME Z490-P
CPU
i5-10400
Graphics
UHD 630
- Built in Ethernet (Controller RealTekRLT8111H) does not work. Network Preferences displays 'Cable not connected' for en0. I used a WiFi dongle up two now.
This is a known issue. See this bug report https://github.com/Mieze/RTL8111_driver_for_OS_X/issues/56
Try 2.2.2 version of this kext: https://github.com/Mieze/RTL8111_driver_for_OS_X/releases

- I try to connect a Samsung EVO 850 SSD through USB to test it before installing it more permanently in the box, but this SSD is not seen either

This test doesn't make a lot of sense. What exactly did you want to test?

- I am in trouble with "displaysleepnow" because it does not work either (the display is restarting as soon as it begins to sleep)

Most likely you're having problems with USB ports. Did you create USB ports map? Read this: https://dortania.github.io/OpenCore-Post-Install/universal/sleep.html
 
Joined
Jan 26, 2011
Messages
25
Motherboard
ASUS Z490 P
CPU
i9-10850K
Graphics
Intel > Need version # > See Rules!
Mac
  1. Mac Pro
Mobile Phone
  1. Android
  2. iOS
Sure here it is:

after testing that you computer boots fine with the attached EFI folder make sure to do the following
Mount partition
Open O.C folder
Delete SSDT-ASUSZ90-TB3HP.aml and SSDT-DTPG.aml from ACPI folder, IF you dont have the Thunderbolt 3 card
if you do then you can leave them where they are.
Open Kexts Folder, delete LucyRTL8125Ethernet.kext , this kext is only for the Realtek Pcie card Ethernet 2.5Gbps LAN
so it is safe to delete unless you have a 2.5Gbps card installed
And lastly open the config.plist, make sure to use "ProperTree" to open the config. while im sure you can use other configurators it is always better to use "ProperTree"
once you open the file click File - OC Snapshot , select OC folder (From EFI PC not USB Flash ) --- then again. File. ----- Clean Snapshot -- select OC folder click choose
Navigate to PlatformInfo
here you can put your serial numbers
For i5 and i7 use iMac20,1
for i9 use iMac20,2
MLB,System Serial Number and System UUID you only need those
and dont forget to fill in the field where it says ROM here you can put your computer's real MAC address
you can find it Device manager in Windows or System Profiler in Mac ,,,the format looks something like this b0:2r:99:b0:M0:00 (<< dont use this it is fake)
when you input the number from you PC only put the numbers and letters dont use the litle dots ( : : : :)
File. ---Save
close eveything then reboot
Hi, I've been trying to use your Thunderbolt SSDT as I bought an asus TB3 for my asus z490p but the main issue is that only one of the two thunderbolt 3 connectors is working, and it can be either port 1 or port 2 depending on whatsoever randomness when I boot my computer....any suggestions??? thanks!
 
Joined
Jan 29, 2011
Messages
39
Motherboard
Gigabyte Z87X-UD3H
CPU
i7 4770k
Graphics
RX580
Hi, I've been trying to use your Thunderbolt SSDT as I bought an asus TB3 for my asus z490p but the main issue is that only one of the two thunderbolt 3 connectors is working, and it can be either port 1 or port 2 depending on whatsoever randomness when I boot my computer....any suggestions??? thanks!
no idea sometimes i get the same issues even in windows 10, so i doubt the SSDT is the problem,
 
Joined
Feb 13, 2013
Messages
4
Motherboard
ASUS Prime Z490P
CPU
i5 10600K
Graphics
UHD 630
Hi everyone!
Thanks to this post I have managed to install catalina on my Asus Prime Z490P pc but I have a problem with the iGPU. My CPU is an i5 10600K with UHD 630. I have connected two monitors with HDMI and Displayport. With my current EFI, I recognize the graphic acceleration of the iGPU and the two ports but when starting the hackintosh, the login is first displayed on the DP monitor. I start the session and after a few seconds, the monitor with HDMI kicks in but flicke. If I want to fix that, I have to disconnect the HDMI cable and reconnect it. This is how the two monitors work, what could be happening? I have misconfigured the EFI -> Devices properties?
 

Attachments

  • Image1.jpg
    Image1.jpg
    936 KB · Views: 4
  • Image2.jpg
    Image2.jpg
    882.5 KB · Views: 4
  • EFI CATALINA 10.5.7.zip
    3.7 MB · Views: 1
Top