Contribute
Register

ASUS Prime Z490-A, Intel Core i9-10850K, 64GB RAM, RX 5700 XT GPU

@shilohh

Thank you so much for the very detailed build guide. My system is almost identical to yours and your guide worked flawlessly! You saved me a lot of hassle and made the upgrade painless. You rock!
Thank you for the kind words.
 
I'm getting 2 errors with this install.

ocs: no schema for BootProtect at 4 index, context (security)!
OCABC: incompatible OpenRuntime r11, require r12
Halting on critical error


any help would be much appreciated
 
I'm getting 2 errors with this install.

ocs: no schema for BootProtect at 4 index, context (security)!
OCABC: incompatible OpenRuntime r11, require r12
Halting on critical error


any help would be much appreciated


Each line relates to an error in your config.plist.
The online Sanity Checker should help you to identify and correct them.

Your config.plist is for a specific version of OpenCore, ensure that all of the OpenCore files match that same version.
 
Thanks - that got me further down the road - but now it's proceeding and then halting with glitchy stuff on the screen with "support.apple.com/startup"

Code:
00:000 00:000 OC: Failed to find ACPI SSDT-RHUB.aml
03:969 03:969 AAPL: #[EB|LOG:INIT] 2021-03-02T05:03:01
04:070 00:101 AAPL: #[EB|VERSION] <"bootbase.efi 495.80.3~11 (Official), built 2020-12-21T21:13:03-0800">
04:153 00:082 AAPL: #[EB|BUILD] <"BUILD-INFO[306]:{"DisplayName":"bootbase.efi","DisplayVersion":"495.80.3~11","RecordUuid":"9D1BBDDB-A7A6-4B24-8D67-9F605C922885","BuildTime":"2020-12-21T21:13:03-0800","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"495.80.3","BuildVersion":"11","BuildConfiguration":"Release","BuildType":"Official"}">
04:235 00:081 AAPL: #[EB|CFG:DEV] r2 0x0 0x0
04:317 00:082 AAPL: #[EB|H:IS] 0
04:398 00:080 AAPL: #[EB|WL:MODE] 0
04:481 00:083 AAPL: #[EB|CFG:ARG] boot-save-log 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) default
04:562 00:080 AAPL: #[EB|CFG:ARG] wake-save-log 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) default
04:644 00:082 AAPL: #[EB|CFG:ARG] console       0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) default
04:725 00:080 AAPL: #[EB|CFG:ARG] serial        0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) default
04:809 00:083 AAPL: #[EB|CFG:ARG] embed-log-dt  0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) default
04:891 00:082 AAPL: #[EB|CFG:ARG] timestamps    0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) default
04:973 00:082 AAPL: #[EB|CFG:ARG] log-level     0x0000000000000001 (0x0000000000000001 & 0x0000000000000021) default
05:055 00:082 AAPL: #[EB|CFG:ARG] breakpoint    0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) default
05:138 00:082 AAPL: #[EB|CFG:ARG] kc-read-size  0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) default
05:220 00:082 AAPL: #[EB|H:IS] 0
05:301 00:081 AAPL: #[EB|WL] 0 0 0x01 0x01   0 0x00
05:383 00:082 AAPL: #[EB|BRD:NV] Mac-AF89B6D9451A490B
05:464 00:080 AAPL: #[EB|WL] 0 0 0x01 0x01   2 0x00
05:547 00:083 AAPL: #[EB.BST.IDT|+]
05:628 00:080 AAPL: #[EB.BST.IDT|-]
05:710 00:082 AAPL: #[EB|WL] 0 0 0x01 0x01   3 0x00
05:795 00:084 AAPL: #[EB|WL] 0 0 0x01 0x01   4 0x00
05:876 00:081 AAPL: #[EB|BRD:NV] Mac-AF89B6D9451A490B
05:958 00:081 AAPL: #[EB|WL] 0 0 0x01 0x01   5 0x00
06:039 00:081 AAPL: #[EB.H.CHK|BM] 0x0000000000000000
06:121 00:082 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:203 00:082 AAPL: #[EB|WL] 0 0 0x01 0x01  23 0x0E
06:285 00:082 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:366 00:080 AAPL: #[EB|WL] 0 0 0x01 0x01  24 0x0E
06:448 00:082 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.GV boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:532 00:083 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-signature 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:616 00:084 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image-key 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:698 00:082 AAPL: #[EB.H.LV|!] Err(0xE) <- RT.SV- boot-image 7C436110-AB2A-4BBB-A880-FE41995C9F82
06:780 00:082 AAPL: #[EB|H:NOT]
06:862 00:081 AAPL: #[EB|SB:p] 0x1
06:945 00:082 AAPL: #[EB.B.MN|BM:+SB]
07:026 00:081 AAPL: #[EB|LIMG:DP] Acpi(PNP0A03,0)/Pci(14|0)/Usb(1, 0)/HD(Part2,SigDDC256C3-4FC0-4574-A40D-D827C8276628)
07:097 00:070 AAPL: #[EB|LIMG:FP] \System\Library\CoreServices\boot.efi
07:164 00:067 AAPL: #[EB|LIMG:OPT]
07:246 00:082 AAPL: #[EB|RPS] 0 0 0
07:334 00:087 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\com.apple.Boot.plist">
07:414 00:079 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\com.apple.Boot.plist"> <"0">
07:495 00:081 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"\\System\\Library\\CoreServices\\com.apple.Boot.plist">
07:577 00:082 AAPL: #[EB.OPT.LXF|LF!] Err(0xE)
07:659 00:081 AAPL: #[EB.OPT.LXF|F] <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist">
07:741 00:082 AAPL: #[EB.LD.LF|IN] 0 1 <"Library\\Preferences\\SystemConfiguration\\com.apple.Boot.plist"> <"0">
07:830 00:089 AAPL: #[EB|KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg">
07:910 00:079 AAPL: #[EB|MBA:CL] <"">
07:991 00:081 AAPL: #[EB|MBA:NV] <"alcid= -v keepsyms=1">
08:074 00:082 AAPL: #[EB|MBA:KF] <"root-dmg=file:///BaseSystem/BaseSystem.dmg">
08:155 00:080 AAPL: #[EB|MBA:OUT] <"alcid= -v keepsyms=1 root-dmg=file:///BaseSystem/BaseSystem.dmg chunklist-security-epoch=0 -chunklist-no-rev2-dev">
08:238 00:083 AAPL: #[EB|LOG:VERBOSE] 2021-03-02T05:03:05
08:319 00:080 AAPL: #[EB|OPT:BM] 0x200002
08:402 00:082 AAPL: #[EB.OPT.LXF|F] <"\\System\\Library\\CoreServices\\PlatformSupport.plist">
08:483 00:081 AAPL: #[EB.LD.LF|IN] 0 1 <"\\System\\Library\\CoreServices\\PlatformSupport.plist"> <"0">
08:573 00:089 AAPL: #[EB|B:VAw]
08:653 00:080 AAPL: #[EB|P:CPR] N
08:735 00:081 AAPL: #[EB|P:MPI] N
08:818 00:083 AAPL: #[EB|P:BPI] N
08:909 00:091 AAPL: #[EB|KMR] 223080448
08:993 00:083 AAPL: #[EB.CS.CSKSD|+]
09:084 00:090 AAPL: #[EB.CS.CSKSD|!] Err(0xE) <- RT.GV boot-info-payload 8D63D4FE-BD3C-4AAD-881D-86FD974BC1DF
09:166 00:081 AAPL: #[EB.G.CS|-?] Ok(0)
09:247 00:081 AAPL: #[EB.LD.LF|IN] 0 1 <"<null string>"> <"1">
09:384 00:136 AAPL: #[EB.B.SBS|SZ] 739896
09:469 00:084 AAPL: #[EB|B:SHA] <6c4c18c09ba51a04539131ed525a219a7a175c00>
09:551 00:082 AAPL: #[EB.WL.PWLFNV|!] Err(0xE) <- RT.GV wake-failure 7C436110-AB2A-4BBB-A880-FE41995C9F82
09:635 00:083 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFNV
09:716 00:081 AAPL: #[EB.WL.PWLFRTC|NONE]
09:798 00:082 AAPL: #[EB.WL.DT|!] Err(0xE) <- EB.WL.PWLFRTC
09:880 00:081 AAPL: #[EB.LD.LKC|D] <"System\Library\KernelCollections\BootKernelExtensions.kc.development">
09:964 00:083 AAPL: #[EB.LD.LF|IN] 0 1 <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.development"> <"0">
10:046 00:082 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.development">
10:129 00:082 AAPL: #[EB.LD.LKC|R.2] <"System\Library\KernelCollections\BootKernelExtensions.kc">
10:211 00:081 AAPL: #[EB.LD.LF|IN] 0 1 <"System\\Library\\KernelCollections\\BootKernelExtensions.kc"> <"0">
21:018 10:807 AAPL: #[EB|SB:p] 0x1
21:097 00:078 AAPL: #[EB|SB:SBGMFNS] j137ap.im4m
21:181 00:083 AAPL: #[EB|SB:MF] System\\Library\\KernelCollections\\BootKernelExtensions.kc.j137ap.im4m
21:263 00:081 AAPL: #[EB.LD.LF|IN] 0 1 <"System\\Library\\KernelCollections\\BootKernelExtensions.kc.j137ap.im4m"> <"0">
21:716 00:453 AAPL: #[EB|SB:MKRN]
21:807 00:090 AAPL: #[EB.LD.LKFS|-?] Ok(0)
21:889 00:082 AAPL: #[EB.LD.LKC|-?] Ok(0)
21:973 00:083 AAPL: #[EB|FWFM] 0x00000000FFDFFF7F
22:054 00:081 AAPL: #[EB|FWFT] 0x00000000FD8FF576
22:137 00:082 AAPL: #[EB|BST:REV1]
22:220 00:083 AAPL: #[EB|CSR:IN] 0x000003E7
22:301 00:080 AAPL: #[EB|CSR:OUT] 0x000003E7
22:388 00:086 AAPL: #[EB.BST.FBS|+]
22:468 00:079 AAPL: #[EB.BST.FBS|ADSZ] 0
22:549 00:081 AAPL: #[EB.BST.FBS|KSSZ] 0
22:631 00:082 AAPL: #[EB|SB:SBGMFNS] j137ap.im4m
22:714 00:083 AAPL: #[EB|RH:pF] usr\standalone\OS.dmg.root_hash
22:796 00:081 AAPL: #[EB|RH:MF] <"usr\\standalone\\OS.dmg.root_hash.j137ap.im4m">
22:878 00:081 AAPL: #[EB.LD.LF|IN] 0 1 <"usr\\standalone\\OS.dmg.root_hash"> <"0">
22:960 00:082 AAPL: #[EB.LD.OFS|OPEN!] Err(0xE) <"usr\\standalone\\OS.dmg.root_hash">
23:043 00:082 AAPL: #[EB.RH.LRH|P!] Err(0xE) <- EB.LD.LF
23:127 00:084 AAPL: #[EB.BST.FBS|!] Err(0xE) <- EB.RH.LRH
23:209 00:082 AAPL: #[EB.B.WFDW|!WF] Err(0xE) 0
23:291 00:081 AAPL: #[EB|LOG:DT] 2021-03-02T05:03:20
23:373 00:081 AAPL: #[EB|LOG:EXITBS:START] 2021-03-02T05:03:20
 
I'm getting 2 errors with this install.

ocs: no schema for BootProtect at 4 index, context (security)!
OCABC: incompatible OpenRuntime r11, require r12
Halting on critical error


any help would be much appreciated
As P1LGRIM stated (Thanks!), you'll want to make sure your config and files are updated for the version of OpenCore that you are using. I believe the current files are for 0.6.5. There should be a note in the top of the config. You could also just download 0.6.5 and use it then update later.
 
Solved the first part of my question of yesterday. Modified DeviceProperties in config.plist as follows gives full functionality to the iGPU and prevents the boot-time crashes in the case that my 5700xt in not plugged in.

With this in place the Hackintosh will allow you to plug a cable into either the iGPU or the 5700xt and even to swap the cable between them (although hot-wapping leads to approx 10 seconds of dark screen followed by a blue screen on my monitor, after which it works) - i am presuming that is the monitor not the computer

(this is a config segment only - open two proper tree windows, Cmd+C the Device Properties node on this one, paste it into your existing config.plist, then delete the old part from config.plist. Finally, remove the " 1" which will have appeared after Device Properties)

Right.... only my Thunderbolt card left to fix. Advice on that is still VERY welcome!!

Cheers,
 

Attachments

  • iGPU.plist
    2.2 KB · Views: 110
Thanks shilohh, based on you guide I was able to install BigSur on the same HW. The only problem I have is the Ethernet. No way to have it working. The System Preference > Network > Ethernet shows it green, network works on house network (can access local NAS) but when I try to open a web page nothing happens...
I saw I225v Ethernet has many issues. Do you have any idea how to solve this?
Worst case I need to find a PCIe Ethernet card that works OOB.
 
Hello,
I am trying to install Bug Sur on a new computer.

I have the same setup except my RAM is Crucial Ballistix 3200 and I have the fenvi T919 wifi card
I have:
ASUS Prime Z490-A LGA 122 (intel 10th Gen)
Intel Core i9-10850
Sapphire Radeon 11265-05-20G Pulse RX 580 8GB GDDR5
Samsung 860 EVO 500gGB
Crucial Ballistix 3200
Fenvi T919 for macOS PCI WiFi card
Corsair RM650x power supply

I followed the instructions exactly and made the BIOS changes.
My bios is version 2004.
Some of the changes in the BIOS were not available in the current BIOS version.
They are:
Above 4G Decoding (not there but able find in search function and set as enabled)​
DVMT Pre-Allocated (not there)​
RC6 (not there)​
Post Delay Time is configurable from 0-10sec and I chose 0 to try to have the same setting as above​
POST Report (not there)​

This is where it breaks. I get the following:

1615562166346.png




Any advice would be greatly appreciated.
Messages from OpenCore and my config.plist are included.
 

Attachments

  • opencore messages.zip
    3 KB · Views: 51
  • config.plist
    25.8 KB · Views: 81
Last edited:
Hi, thanks so much. Everything was perfect (with OpenCore 0.6.5, with 0.6.7 ocs error). But I am not able to install Mac and win with select menu at the first screen. Can you?? What is the order to install?? Thanks you so much.
 
Hello,
I am trying to install Bug Sur on a new computer.

I have the same setup except my RAM is Crucial Ballistix 3200 and I have the fenvi T919 wifi card
I have:
ASUS Prime Z490-A LGA 122 (intel 10th Gen)
Intel Core i9-10850
Sapphire Radeon 11265-05-20G Pulse RX 580 8GB GDDR5
Samsung 860 EVO 500gGB
Crucial Ballistix 3200
Fenvi T919 for macOS PCI WiFi card
Corsair RM650x power supply

I followed the instructions exactly and made the BIOS changes.
My bios is version 2004.
Some of the changes in the BIOS were not available in the current BIOS version.
They are:
Above 4G Decoding (not there but able find in search function and set as enabled)​
DVMT Pre-Allocated (not there)​
RC6 (not there)​
Post Delay Time is configurable from 0-10sec and I chose 0 to try to have the same setting as above​
POST Report (not there)​

This is where it breaks. I get the following:

View attachment 512063



Any advice would be greatly appreciated.
Messages from OpenCore and my config.plist are included.
You have to do it with OpenCore 0.6.5, and it will be OK.
 
Back
Top