Asus p8z77-v lx with new i5 3570

[anton56]

I have replaced my pentiun G860 for a i5 3570 without nvidia card 210 (I am thinking, i make a mistake, I5 3570k has a HD4000)

and had this screen. iT IS A KERNEL PANIC? OR THE SYSTEM STOPS?




Even in a new installation using combo update 10.8.4

 

[RehabMan]

I have replaced my pentiun G860 for a i5 3570 without nvidia card 210 (I am thinking, i make a mistake, I5 3570k has a HD4000)

and had this screen. iT IS A KERNEL PANIC? OR THE SYSTEM STOPS?




Even in a new installation using combo update 10.8.4

What screen?

 

[anton56]

Sorry, I don't understand exactly how to attach ta image. let's try again



ok lets' see now

Thank's

 

[RehabMan]

Sorry, I don't understand exactly how to attach ta image. let's try again

View attachment 60316

ok lets' see now

Thank's

Well, I don't see a crash there, but I do see that you're getting some 'backtrace' lines which indicates you're using an old version of FakeSMC.kext. You might try updating.

But you're switching from using a video card to using on-chip graphics, so you'll likely have to make some changes to your config. GraphicsEnabler=Yes, perhaps...

 

[anton56]

My FakeSMC is that come with multibeast mountain Lion 5.3.1

wich one I can try?

Thanks

 

[RehabMan]

My FakeSMC is that come with multibeast mountain Lion 5.3.1

wich one I can try?

Thanks

I don't think it is because I believe the one in Multibeast was updated recently enough to not have those backtrace lines...

... but the latest is always here: https://github.com/kozlek/HWSensors

 

[anton56]

Yes I tried graphicsenabler=yes too.

I did a new installation with MLion 10.8 with success then applies updates combos 10.8.1 success but video resolution 1280x768 and no tranparent menu bar

then 10.8.2 and the same problem with -v option only with -v -x options start.

changed the SMBIOS.plist from MacPro 3.1 to Imac 13.1 and MLion started with the video limitations above.

Updated to 10.8.3, and no start , with -v the fakeSMC problem.

 

[RehabMan]

Yes I tried graphicsenabler=yes too.

It is case sensitive. You would need to try GraphicsEnabler=Yes.

 

[anton56]

It is case sensitive. You would need to try GraphicsEnabler=Yes.

Yes I write wrong GraphicsEnabler in the message but not in the configuration file.

I installed HWSensors.5.1.71.pkg withe same issue

 

[RehabMan]

Yes I write wrong GraphicsEnabler in the message but not in the configuration file.

I installed HWSensors.5.1.71.pkg withe same issue

You have a ton of kext issues there. You should do a fresh install.