Contribute
Register

ASUS P8Z68-V Pro Gen 3 Build- having issues.

Status
Not open for further replies.
How about these?

-v
-v PCIRootUID=0 GraphicsEnabler=Yes darkwake=0
-v BuiltInEthernet=Yes PCIRootUID=0 GraphicsEnabler=Yes



Hey Middleman,

So -v it hangs at Kernel Extensions in backtrace:
Com.apple.driver.AppleRTC(1.5) [8B54D373-D42E-30A3-B852-BD86BB9934EF AND KEEPS GOING
Dependency: com.apple.iokit.I0ACPIFamily(1.1)



-v PCIRootUID=0 GraphicsEnabler=Yes darkwake=0 hangs at Kernel Extensions in backtrace:

org.netkas.drivers.FakeSMC (4.3.5)
dependency: com.apple.iokit.I0ACPIFamily(1.4)




-v BuiltInEthernet=Yes PCIRootUID=0 GraphicsEnabler=Yes hangs at Kernel Extensions in backtrace:

org.netkas.drivers.FakeSMC (4.3.5)
dependency: com.apple.iokit.I0ACPIFamily(1.4)



i dont know what else to do?? i dont know why i am having all these issues...
 
xd4vrx,

Did you apply the AppleACPIPlatform rollback with Multibeast as I asked you to do?
 
Xd4v3x,

Just had a look at your previous postings...

Have you tried to remove the PCIRootUID setting altogether in your org.chameleon.Boot.plist?
As having that can cause problems. See if you can change your plist to mine (which works with the Nvidia card on a P8Z68-V Pro):

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>npci=0x2000 darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>

With the above settings, and provided you have disabled Speedstep and Intel Virtualisation in your BIOS it should work!

If you are still stuck, I would suggest you do a complete install using my guide:
>http://www.tonymacx86.com/mountain-...n-lion-10-8-2-intel-hd4000-nvidia-gtx660.html
 
Xd4v3x,

Just had a look at your previous postings...

Have you tried to remove the PCIRootUID setting altogether in your org.chameleon.Boot.plist?
As having that can cause problems. See if you can change your plist to mine (which works with the Nvidia card on a P8Z68-V Pro):

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>npci=0x2000 darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>

With the above settings, and provided you have disabled Speedstep and Intel Virtualisation in your BIOS it should work!

If you are still stuck, I would suggest you do a complete install using my guide:
>http://www.tonymacx86.com/mountain-...n-lion-10-8-2-intel-hd4000-nvidia-gtx660.html

Thanks Middleman, I try that later today when I get back home.
 
Xd4v3x,

Just had a look at your previous postings...

Have you tried to remove the PCIRootUID setting altogether in your org.chameleon.Boot.plist?
As having that can cause problems. See if you can change your plist to mine (which works with the Nvidia card on a P8Z68-V Pro):

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>npci=0x2000 darkwake=0</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>

With the above settings, and provided you have disabled Speedstep and Intel Virtualisation in your BIOS it should work!

If you are still stuck, I would suggest you do a complete install using my guide:
>http://www.tonymacx86.com/mountain-...n-lion-10-8-2-intel-hd4000-nvidia-gtx660.html

Hey Middleman so removing PCIRootUID from the sting didnt work. :/


so i went off you link you provided followed the steps in disabling things in my bios when it came to book off my thumb drive for unitbeast and type in this command. -v -x GraphicsEnabler=Yes npci=0x2000 , the monitor goes black after running that command. the only command i see working to boot into my installer is PCIRootUID=0 -x :/ what do you think is the cause of the black screen when i use your command??

Thanks again.
 
Xd4v3x,

When the screen goes black, can you attach it to another monitor port? Which port are you connected to on the system? Is it the last DVI port on the NVidia?
 
Xd4v3x,

When the screen goes black, can you attach it to another monitor port? Which port are you connected to on the system? Is it the last DVI port on the NVidia?

its the one on the left side. i tried both ports and it doesnt matter. still getting a black screen after the command is ranned.
so yea after you see all the scipting running and then it acts like its going to pop up with the install then it just goes black.. :/
 
Status
Not open for further replies.
Back
Top