- Joined
- Jul 25, 2012
- Messages
- 15
- Motherboard
- Gigabyte Z97X-UD3H
- CPU
- Intel i5-4690
- Graphics
- GTX 660
- Mac
- Mobile Phone
Asus + Mountain Lion = Can't wake from sleep
Ok, I think I have everything working except for wake from sleep (which works on my SL install). I can put the computer to sleep, but when I bring it up from sleep using mouse, keyboard or power button, the following happens:
I also have VNC/screen share setup and I tested it works before sleep. After wake, I cannot VNC in, so it is not just video that's not workin.
Here are the things I've attempted (not together, I would undo one attempt before trying the next):
I saw improvement with the CMOS Patch manually (I used to get the CMOS resets before doing this patch).
I have what seems to be a proper working DSDT.aml that I patched using a DSDT Editor and a patch for my motherboard at olarila.com. I'm also using an SSDT.aml installed by MutliBeast.
I have a very minimal kext list, trying to keep it as vanilla as possible. I had to modify IONetworkingFamily.kext to make my onboard NIC's work. I installed a patched version of 10.6's AppleHDA.kext to get my sound working.
I have the following in my E/E:
AHCI_3rdParty_SATA.kext
FakeSMC.kext
(I had the rolled back v1.3.5 AppleACPIPlatform.kext to cut back on the boot delay, but I don't see the boot delay without it, so I removed it and reinstalled the original 1.6 kext in S/L/E)
my org.chameleon.Boot.plist:
<key>Default Partition</key>
<string>hd(0,2)</string>
<key>EthernetBuiltIn</key>
<string>y</string>
<key>Graphics Mode</key>
<string>1920x1200x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>darkwake=0 -v arch=x86_64</string>
<key>Timeout</key>
<string>2</string>
<key>RestartFix</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
smbios.plist has imac 12,2 set at the moment, but I've tried macpro 3,1 & 4,1.
I have a clean boot, I can't see anything wrong with it. Again, when I wake, I don't see kernel panics. Just this hang...
Any help would be much appreciated =)
Please let me know if there is anymore info I can provide.
Ok, I think I have everything working except for wake from sleep (which works on my SL install). I can put the computer to sleep, but when I bring it up from sleep using mouse, keyboard or power button, the following happens:
- Case/CPU fans spin up.
- Video card fans spin up.
- Hard drive comes up (I have a loud velociraptor)
- No video on either of dual monitors
- Computer just sits there, no reboot
I also have VNC/screen share setup and I tested it works before sleep. After wake, I cannot VNC in, so it is not just video that's not workin.
Here are the things I've attempted (not together, I would undo one attempt before trying the next):
- MultiBeast 4.6.1 ElliottForceLegacyRTC
- MultiBeast 4.6.1 AppleRTC Patch for CMOS Reset
- CMOS Patch Manually (CMOS Resets by AppleRTC.kext - insanely-mac Forum)
I saw improvement with the CMOS Patch manually (I used to get the CMOS resets before doing this patch).
I have what seems to be a proper working DSDT.aml that I patched using a DSDT Editor and a patch for my motherboard at olarila.com. I'm also using an SSDT.aml installed by MutliBeast.
I have a very minimal kext list, trying to keep it as vanilla as possible. I had to modify IONetworkingFamily.kext to make my onboard NIC's work. I installed a patched version of 10.6's AppleHDA.kext to get my sound working.
I have the following in my E/E:
AHCI_3rdParty_SATA.kext
FakeSMC.kext
(I had the rolled back v1.3.5 AppleACPIPlatform.kext to cut back on the boot delay, but I don't see the boot delay without it, so I removed it and reinstalled the original 1.6 kext in S/L/E)
my org.chameleon.Boot.plist:
<key>Default Partition</key>
<string>hd(0,2)</string>
<key>EthernetBuiltIn</key>
<string>y</string>
<key>Graphics Mode</key>
<string>1920x1200x32</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>darkwake=0 -v arch=x86_64</string>
<key>Timeout</key>
<string>2</string>
<key>RestartFix</key>
<string>Yes</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
smbios.plist has imac 12,2 set at the moment, but I've tried macpro 3,1 & 4,1.
I have a clean boot, I can't see anything wrong with it. Again, when I wake, I don't see kernel panics. Just this hang...
Any help would be much appreciated =)
Please let me know if there is anymore info I can provide.