Contribute
Register

ASRock Z490 Phantom gaming ITX/TB3 power management (pmset) settings

Status
Not open for further replies.
Joined
Jan 27, 2014
Messages
375
Motherboard
ASRock Z490 phantom gaming ITX/TB3
CPU
I9 10850k
Graphics
RX 5500 XT/UHD 630
Mobile Phone
  1. iOS
Hi there,

Still not sure I got the power management settings right for my system and would appreciate help on this one.

My system is based on an ASRock Z490 Phantom gaming ITX/TB3 with a I9 10850k.

Default pmset and Hackintool's power management

Screenshot 2021-06-28 at 12.27.50.png
Screenshot 2021-06-28 at 12.28.34.png


If I press the sleepimage fix option on Hackintool, it will change hibernatemode from 3 to 1 and proximitywake to 0. Is this enough or is there something else to tweak?

I checked on the web and found two users with the same motherboard and I9 10900k processor and neither had any standby settings on their systems (highstandbythreshold, standby, standbydelayhigh, standbydelaylow) which makes me wonder if standby has to be turned off in the bios?

Thanks in advance for any help on clarifying this :)
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
29,021
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Hi there,

Still not sure I got the power management settings right for my system and would appreciate help on this one.

My system is based on an ASRock Z490 Phantom gaming ITX/TB3 with a I9 10850k.

Default pmset and Hackintool's power management

View attachment 523159View attachment 523160

If I press the sleepimage fix option on Hackintool, it will change hibernatemode from 3 to 1 and proximitywake to 0. Is this enough or is there something else to tweak?

I checked on the web and found two users with the same motherboard and I9 10900k processor and neither had any standby settings on their systems (highstandbythreshold, standby, standbydelayhigh, standbydelaylow) which makes me wonder if standby has to be turned off in the bios?

Thanks in advance for any help on clarifying this :)
you can also run these commands in terminal:
Code:
sudo pmset -a hibernatemode 0
sudo pmset -a standby 0
sudo pmset -a autopoweroff 0
sudo rm /var/vm/sleepimage
sudo mkdir /var/vm/sleepimage
 
Joined
Jan 27, 2014
Messages
375
Motherboard
ASRock Z490 phantom gaming ITX/TB3
CPU
I9 10850k
Graphics
RX 5500 XT/UHD 630
Mobile Phone
  1. iOS
Hi Feartech,

The system was stable but then it restarted yesterday; here is the generated problem report:

panic(cpu 6 caller 0xffffff80015c58f6): Kernel trap at 0xffffff8001465abd, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffda1876d878f, CR3: 0x00000006458b417f, CR4: 0x00000000003626e0
RAX: 0xffffff86b4f1d400, RBX: 0x0000000000000000, RCX: 0xffffff86b4af8188, RDX: 0xffffff86b5709c78
RSP: 0xffffffc0f9e6bd38, RBP: 0xffffffc0f9e6bd40, RSI: 0x0000000000000000, RDI: 0xffffff86b51cfcf4
R8: 0x0000000000000906, R9: 0xffffff86a83ac8a0, R10: 0x0000000000000008, R11: 0x0000000000000000
R12: 0xffffff86a7fa5c80, R13: 0x0000000000000906, R14: 0xffffff86b4af8100, R15: 0xffffff86b5709c78
RFL: 0x0000000000010202, RIP: 0xffffff8001465abd, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xfffffda1876d878f, Error code: 0x0000000000000002, Fault CPU: 0x6, PL: 0, VF: 1

Backtrace (CPU 6), Frame : Return Address
0xffffffc0f9e6b750 : 0xffffff800148e0dd mach_kernel : _handle_debugger_trap + 0x3fd
0xffffffc0f9e6b7a0 : 0xffffff80015d4f33 mach_kernel : _kdp_i386_trap + 0x143
0xffffffc0f9e6b7e0 : 0xffffff80015c552a mach_kernel : _kernel_trap + 0x55a
0xffffffc0f9e6b830 : 0xffffff8001432a2f mach_kernel : _return_from_trap + 0xff
0xffffffc0f9e6b850 : 0xffffff800148d8fd mach_kernel : _DebuggerTrapWithState + 0xad
0xffffffc0f9e6b970 : 0xffffff800148dbf3 mach_kernel : _panic_trap_to_debugger + 0x273
0xffffffc0f9e6b9e0 : 0xffffff8001c9d81a mach_kernel : _panic + 0x54
0xffffffc0f9e6ba50 : 0xffffff80015c58f6 mach_kernel : _sync_iss_to_iks + 0x2c6
0xffffffc0f9e6bbd0 : 0xffffff80015c55dd mach_kernel : _kernel_trap + 0x60d
0xffffffc0f9e6bc20 : 0xffffff8001432a2f mach_kernel : _return_from_trap + 0xff
0xffffffc0f9e6bc40 : 0xffffff8001465abd mach_kernel : _ipc_importance_for_task + 0x4d
0xffffffc0f9e6bd40 : 0xffffff8001467b46 mach_kernel : _ipc_importance_receive + 0x206
0xffffffc0f9e6bde0 : 0xffffff800148099b mach_kernel : _mach_msg_receive_results + 0x21b
0xffffffc0f9e6be60 : 0xffffff800148148a mach_kernel : _mach_msg_overwrite_trap + 0x44a
0xffffffc0f9e6bef0 : 0xffffff80015a982d mach_kernel : _mach_call_munger64 + 0x29d
0xffffffc0f9e6bfa0 : 0xffffff8001433216 mach_kernel : _hndl_mach_scall64 + 0x16

Process name corresponding to current thread: com.apple.WebKit.WebContent
Boot args: keepsyms=1 debug=0x100 chunklist-security-epoch=0 -chunklist-no-rev2-dev

Mac OS version:
20F71

Kernel version:
Darwin Kernel Version 20.5.0: Sat May 8 05:10:33 PDT 2021; root:xnu-7195.121.3~9/RELEASE_X86_64
Kernel UUID: ********-****-****-****-************
KernelCache slide: 0x0000000001200000
KernelCache base: 0xffffff8001400000
Kernel slide: 0x0000000001210000
Kernel text base: 0xffffff8001410000
__HIB text base: 0xffffff8001300000
System model name: iMac20,2 (Mac-****************)
System shutdown begun: NO
Panic diags file available: YES (0x0)
Hibernation exit count: 0

System uptime in nanoseconds: 10460349319208
Last Sleep: absolute base_tsc base_nano
Uptime : 0x000009837d67caa6
Sleep : 0x0000070f659c29c1 0x000000016c79485c 0x000003109df977b8
Wake : 0x0000070f6c1bdf80 0x0000000181daa434 0x0000070f670ed0d4

Is the issue related to power management by any chance?

Thanks!
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
29,021
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Hi Feartech,

The system was stable but then it restarted yesterday; here is the generated problem report:

panic(cpu 6 caller 0xffffff80015c58f6): Kernel trap at 0xffffff8001465abd, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffda1876d878f, CR3: 0x00000006458b417f, CR4: 0x00000000003626e0
RAX: 0xffffff86b4f1d400, RBX: 0x0000000000000000, RCX: 0xffffff86b4af8188, RDX: 0xffffff86b5709c78
RSP: 0xffffffc0f9e6bd38, RBP: 0xffffffc0f9e6bd40, RSI: 0x0000000000000000, RDI: 0xffffff86b51cfcf4
R8: 0x0000000000000906, R9: 0xffffff86a83ac8a0, R10: 0x0000000000000008, R11: 0x0000000000000000
R12: 0xffffff86a7fa5c80, R13: 0x0000000000000906, R14: 0xffffff86b4af8100, R15: 0xffffff86b5709c78
RFL: 0x0000000000010202, RIP: 0xffffff8001465abd, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xfffffda1876d878f, Error code: 0x0000000000000002, Fault CPU: 0x6, PL: 0, VF: 1

Backtrace (CPU 6), Frame : Return Address
0xffffffc0f9e6b750 : 0xffffff800148e0dd mach_kernel : _handle_debugger_trap + 0x3fd
0xffffffc0f9e6b7a0 : 0xffffff80015d4f33 mach_kernel : _kdp_i386_trap + 0x143
0xffffffc0f9e6b7e0 : 0xffffff80015c552a mach_kernel : _kernel_trap + 0x55a
0xffffffc0f9e6b830 : 0xffffff8001432a2f mach_kernel : _return_from_trap + 0xff
0xffffffc0f9e6b850 : 0xffffff800148d8fd mach_kernel : _DebuggerTrapWithState + 0xad
0xffffffc0f9e6b970 : 0xffffff800148dbf3 mach_kernel : _panic_trap_to_debugger + 0x273
0xffffffc0f9e6b9e0 : 0xffffff8001c9d81a mach_kernel : _panic + 0x54
0xffffffc0f9e6ba50 : 0xffffff80015c58f6 mach_kernel : _sync_iss_to_iks + 0x2c6
0xffffffc0f9e6bbd0 : 0xffffff80015c55dd mach_kernel : _kernel_trap + 0x60d
0xffffffc0f9e6bc20 : 0xffffff8001432a2f mach_kernel : _return_from_trap + 0xff
0xffffffc0f9e6bc40 : 0xffffff8001465abd mach_kernel : _ipc_importance_for_task + 0x4d
0xffffffc0f9e6bd40 : 0xffffff8001467b46 mach_kernel : _ipc_importance_receive + 0x206
0xffffffc0f9e6bde0 : 0xffffff800148099b mach_kernel : _mach_msg_receive_results + 0x21b
0xffffffc0f9e6be60 : 0xffffff800148148a mach_kernel : _mach_msg_overwrite_trap + 0x44a
0xffffffc0f9e6bef0 : 0xffffff80015a982d mach_kernel : _mach_call_munger64 + 0x29d
0xffffffc0f9e6bfa0 : 0xffffff8001433216 mach_kernel : _hndl_mach_scall64 + 0x16

Process name corresponding to current thread: com.apple.WebKit.WebContent
Boot args: keepsyms=1 debug=0x100 chunklist-security-epoch=0 -chunklist-no-rev2-dev

Mac OS version:
20F71

Kernel version:
Darwin Kernel Version 20.5.0: Sat May 8 05:10:33 PDT 2021; root:xnu-7195.121.3~9/RELEASE_X86_64
Kernel UUID: ********-****-****-****-************
KernelCache slide: 0x0000000001200000
KernelCache base: 0xffffff8001400000
Kernel slide: 0x0000000001210000
Kernel text base: 0xffffff8001410000
__HIB text base: 0xffffff8001300000
System model name: iMac20,2 (Mac-****************)
System shutdown begun: NO
Panic diags file available: YES (0x0)
Hibernation exit count: 0

System uptime in nanoseconds: 10460349319208
Last Sleep: absolute base_tsc base_nano
Uptime : 0x000009837d67caa6
Sleep : 0x0000070f659c29c1 0x000000016c79485c 0x000003109df977b8
Wake : 0x0000070f6c1bdf80 0x0000000181daa434 0x0000070f670ed0d4

Is the issue related to power management by any chance?

Thanks!
could be many things

make sure to disable trusted computing in your bios if present

also make sure your usb ports are also configurated correctly:
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
29,021
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
trusted computing is disabled and ports are configured ;)
not sure, try uploading your zipped efi so someone can take a look
 

Feartech

Moderator
Joined
Aug 3, 2013
Messages
29,021
Motherboard
Asus N752VX-OpenCore
CPU
i7-6700HQ / HM170
Graphics
HD 530 1920 x 1080
Mac
  1. iMac
Mobile Phone
  1. iOS
Here it is

Hope someone can help. The computer just restarted again :(
you have:
SSDT-USBW.aml but you are missing renames in your config.plist, try without that file

also test without: USBWakeFixup.kext
 
Status
Not open for further replies.
Top