- Joined
- Mar 13, 2012
- Messages
- 114
- Motherboard
- Gigabyte Z690 Vision G
- CPU
- i7-12700K
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
Yes, if you know you are only going to use a USB3 device in that port you can disable the HS06, however be aware that by doing so, it will not recognise a USB2 device if you plug it into that port, only USB3 devices.
Just installed the AML file, all ports works perfectly a very high speed.The Hub on my BENQ PD3200U monitor works fine and also the SD card reader bundled with the monitor word fine (speed is not very high but I think that this is an sd card reader limit; using my lexar pro reader the speed is about150% or double respect to the monitor one. Using lexar 1066 CF card on the lexar card reader I get a transfer rate of about 135MB/s reading and 110 MB/s writing. Connecting a Samsung 860 EVO ssd to an USB port using a UGreen Sata III to USB 3.0 adapter I can get a speed of about 380 MB/s during writing and 420MB/s reading. I'm so happy!
I just want to thanks all you guys again!