Contribute
Register

Asrock Z370 Taichi/Thunderbolt/8700K

Status
Not open for further replies.
I have sleep working now. when it wakes up, I get a USB device disabled too much power error. All my USB devices appear to be working though.
 
Can you share how you were able to get sleep working ? Thanks
 
Can you share how you were able to get sleep working ? Thanks

The same request. Everything is working except sleep/wake. Please help.
 
@neivil, please update your profile (personal details) with your Motherboard, CPU and iGPU or Graphics Card(s).
If you have a prebuilt computer enter make and model instead of motherboard.
The Rules said:
Profiles are mandatory so that others can assist you.
 
I used ioreg to determine which usb ports to disable. I added this to my config.sys in the boot section using Clover Config

uia_exclude=HS03;HS09;HS10;HS11;HS12;HS13;HS14;SS01;SS02;SS03;SS04;SS05;SS07;SS08;SS09;SS10;USR1;USR2

Sleep now works
 
And one more thing: how did you enable Thunderbolt in Mac OS?
I enabled it in BIOS but Mac OS doesn't see it.
 
You need to ensure the thunderbolt card is in the proper slot. You also have to boot into Windows at least once to install the Windows drivers and activate the card.

OSX will not show thunderbolt available unless you have a thunderbolt device plugged in and running before you boot.
 
Status
Not open for further replies.
Back
Top