Contribute
Register

AsRock X299 Creator

Status
Not open for further replies.
@Loloflatsix Try to Flash this bios version. Its made for Windows flashing.

Everything you need is attached in the File.
 

Attachments

  • X299 Creator.zip
    10.4 MB · Views: 79
@Loloflatsix Try to Flash this bios version. Its made for Windows flashing.

Everything you need is attached in the File.
Thanks !
I think other people with the same mobo should also be interested !
 
For those of you with an x299, any advice on what PSU you are using that has 2 12vatx cpu cables? Or stability reports for those splitting an 8 into 2 4s? (the asrock creator manual says you can use a 4pin on the motherboard 12vatx port)

I just setup my ASRock creator x299 build and realized my PSU only has one 8 pin 12vatx cable... Doh!
 
Last edited:
Hello
i'm back with the X299 creator.
I use loloflatsix's EFI folder and change SMBIOS to Mac Pro 7.1.
None of the USB port works (4 USB 3 and 2 USB 2 at the back of the Mobo)
There only a Keyboard and a mouse plugged ..... witch work fine in the BIOS and Clover Menus
Any clue ?
Thanks in advance
P.S. With screensharing on, I can control it remotely from the laptop ;)
EDIT :
Something bother me, some/all DSDT active patches seem to be ignored.
PC00 ➧ PCI0 & LPC0 ➧ LPCB for example.
What Am I missing ?
 

Attachments

  • X299 creator no USB.ioreg
    4 MB · Views: 74
  • AsRock X299 Creator v5.zip
    4.3 MB · Views: 54
Last edited:
capture 2020-03-28 à 08.19.21.png

There's too many entries/lines, no ?
On XHCI there is SSPx and SS0x ... seems no correct
 
@oli.mathieu all right, you're back with the X299 Creator !
I encountered this problem too :
There are too many ports as you saw :
On Rear Panel I/O only :
- 2 x USB 2.0 Ports
- 2 x (1+1) x USB 3.2 Gen1 Ports (2 ports each divided into two)
- 2 x USB 3.2 Gen2 Thunderbolt Type-C Ports
All other ports are internal :
- 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
- 1 x USB 3.2 Gen1 Header
- 1 x Front Panel Type C (ASMedia ASM3142)
A suitable USB kext can therefore solve the problem
I ran out of time to do it ;)
 
Status
Not open for further replies.
Back
Top