Contribute
Register

Asrock H81M-VG4 and El Capitan 10.11.5

Status
Not open for further replies.
Joined
Jun 2, 2016
Messages
3
A)
Hardware info:
http://www.asrock.com/mb/Intel/H81M-VG4/?cat=Specifications
(Check your hardware.)

B)
Download my hackintosh package.
(The zip file attached to this post.)

C)
Read installation guide.
http://www.tonymacx86.com/threads/u...pitan-on-any-supported-intel-based-pc.172672/

Follow it.

STEP 2 / 15.
CHOOSE Legacy Boot Mode

AFTER STEP 2:
-config.plist
-ssdt-2.aml
Installer USB stick, simply copy these two files in the right places:
config.plist: USB drive/EFI/Clover
ssdt-2.aml: USB drive/EFI/Clover/ACPI/patched

STEP 5 / 7.
CHOOSE Legacy Boot Mode
Bulid it and restart your computer.

Easykext Utility APP:
ADD
kexts.
I had problems with audio ALC662 and graphics

Restart and enjoy!

I was using tothbence giude:
http://www.tonymacx86.com/threads/success-asrock-h81m-vg4-intel-celeron-g1820-geforce-gt-730.178360/
 

Attachments

  • hackintos.zip
    42.3 MB · Views: 1,708
Many thanks for your files. Now my ASROCK H81m with G3260 CPU and AMD RADEON 6450 works great.
 
A)
Hardware info:
http://www.asrock.com/mb/Intel/H81M-VG4/?cat=Specifications
(Check your hardware.)

B)
Download my hackintosh package.
(The zip file attached to this post.)

C)
Read installation guide.
http://www.tonymacx86.com/threads/u...pitan-on-any-supported-intel-based-pc.172672/

Follow it.

STEP 2 / 15.
CHOOSE Legacy Boot Mode

AFTER STEP 2:
-config.plist
-ssdt-2.aml
Installer USB stick, simply copy these two files in the right places:
config.plist: USB drive/EFI/Clover
ssdt-2.aml: USB drive/EFI/Clover/ACPI/patched

STEP 5 / 7.
CHOOSE Legacy Boot Mode
Bulid it and restart your computer.

Easykext Utility APP:
ADD
kexts.
I had problems with audio ALC662 and graphics

Restart and enjoy!

I was using tothbence giude:
http://www.tonymacx86.com/threads/success-asrock-h81m-vg4-intel-celeron-g1820-geforce-gt-730.178360/


Hi. I have the same motherboard as you but I was not able to make my hack sleep. Were you able to make sleep work? If so, can you detail what steps you made to make it work? I've already tried creating an ssdt using ssdtPRGen.sh (Pike), made sure appleALC is loaded and working, disabled bios c states and adjusted clover ssdt fields to load the ssdt (and set -xcpm on boot in clover). Power management is working (as confirmed by using Intel Power Gadget), but sleep is not. I've ran out of ideas. Perhaps you can help me?
 
Many thanks for your files. Now my ASROCK H81m with G3260 CPU and AMD RADEON 6450 works great.
Hi rennerst, mind sharing what you did to make sound work on your Asrock H81m-vg4?
 
Hi rennerst, mind sharing what you did to make sound work on your Asrock H81m-vg4?
Nevermind. I just applied the kexts giade included and now i have working audio. Hope nothing breaks. :) Thank you giade.

PS: Giade, are you still having problems with audio after using the kexts you provided? And whats the fakepciid-intelHD kext for? (Im using onboard graphics and did not install that kext).
 
Last edited:
thanks...but not works....
 
bios setting....?????
 
you restart nothing to do
 
bios setting as rock h81mvg4..r2
 
Status
Not open for further replies.
Back
Top