AR9280 ATHR: Unknown locale: xx - EEPROM Mod

[RehabMan]

@RM Sir,
Wer is linux guide!

For India = IN, should be the correct patch

post #61.
(you could have searched the thread for 'Linux')

 

[siddsimac]

post #61.
(you could have searched the thread for 'Linux')

Sorry RM Sir

Sir i was bit depressed(but i quickly browsed through) as AMD 7650m Is not working on 10.13.1...and this Local error is annoying me

 

[siddsimac]

@RM sir,
It is not woking for me . i did it twice

i replaced 0x65 to 0x00 but no luck

sir ny advice to make it work(India) !

my - echo -n IN|xxd = 494e.(don't know, how its link )

 

[RehabMan]

@RM sir,
It is not woking for me . i did it twice

i replaced 0x65 to 0x00 but no luck

sir ny advice to make it work(India) !

my - echo -n IN|xxd = 494e.(don't know, how its link )

You should double check your work.

 

[siddsimac]

RM Sir,
U said, it should be offset/checksum = 0/255... (it is not writing)

One user have succeeded by increasing the value. But i have the habit of taking the final goto from u...so i was waiting for guidance

 

[RehabMan]

RM Sir,
U said, it should be offset/checksum = 0/255... (it is not writing)

One user have succeeded by increasing the value. But i have the habit of taking the final goto from u...so i was waiting for guidance

Keep working at it and follow the instructions carefully, you'll figure out what you did wrong.

 

[siddsimac]

RM Sir,
plz, just give a hint..ive tried more 5x times...
Sir wat will be regdom for IN(is it 0x164) n wat in 494e(echo -n IN|xxd)
sir was if i edit rom in hex edit, was value should i look for !
Sir i don't want to brick it as I've recently purchased it
on top of that AMD 7650M is giving me headache on 10.13.1

ubuntu@ubuntu:~/Desktop/iwleeprom$ sudo -s
root@ubuntu:~/Desktop/iwleeprom# ifdown wlan0
Unknown interface wlan0
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -I
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
No file names given nor actions selected!
No EEPROM actions will be performed, just write-enable test
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -s
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
MAC address : 08:60:01:00:80:02
Reg. domain : 168c
Capabilities: 6000
Bands:
HT 2G: HT20 HT40
HT 5G: HT20 HT40
CRC (stored): 0000
Calculating EEPROM CRC...............................
CRC (eval) : 52fe
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -o original.bin
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
Saving dump with byte order: LITTLE ENDIAN
0000 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0080 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0100 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0180 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0200 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0280 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0300 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0380 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0400 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0480 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0500 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0580 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0600 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0680 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0700 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0780 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0800 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0880 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0900 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0980 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]

EEPROM has been dumped to 'original.bin'
root@ubuntu:~/Desktop/iwleeprom# cp original.bin etsic0x65.bin
root@ubuntu:~/Desktop/iwleeprom# echo -ne '\x00' | dd of=etsic0x65.bin bs=1 seek=520 conv=notrunc
1+0 records in
1+0 records out
1 byte copied, 6.1971e-05 s, 16.1 kB/s
root@ubuntu:~/Desktop/iwleeprom# echo Y|./iwleeprom -d 0000:02:00.0 -i etsic0x65.bin
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
About to write device EEPROM, press 'Y' if you are sure... Writing data to EEPROM...
'.' = match, 'x' = write
Dump file byte order: LITTLE ENDIAN
0000 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0080 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0100 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0180 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0200 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0280 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0300 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0380 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0400 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0480 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0500 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0580 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0600 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0680 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0700 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0780 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0800 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0880 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0900 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0980 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]

EEPROM has been written from 'etsic0x65.bin'
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -s
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
MAC address : 08:60:01:00:80:02
Reg. domain : 168c
Capabilities: 6000
Bands:
HT 2G: HT20 HT40
HT 5G: HT20 HT40
CRC (stored): 0000
Calculating EEPROM CRC...............................
CRC (eval) : 52fe
root@ubuntu:~/Desktop/iwleeprom# cp etsic0x65.bin etsic0x65crc.bin
root@ubuntu:~/Desktop/iwleeprom# echo -ne '\xfe\x52' | dd of=etsic0x65crc.bin bs=1 seek=514 conv=notrunc
2+0 records in
2+0 records out
2 bytes copied, 6.8759e-05 s, 29.1 kB/s
root@ubuntu:~/Desktop/iwleeprom# echo Y|./iwleeprom -d 0000:03:00.0 -i etsic0x65crc.bin
No such PCI device: 0000:03:00.0
root@ubuntu:~/Desktop/iwleeprom# echo Y|./iwleeprom -d 0000:02:00.0 -i etsic0x65crc.bin
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
About to write device EEPROM, press 'Y' if you are sure... Writing data to EEPROM...
'.' = match, 'x' = write
Dump file byte order: LITTLE ENDIAN
0000 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0080 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0100 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0180 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0200 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0280 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0300 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0380 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0400 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0480 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0500 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0580 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0600 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0680 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0700 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0780 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0800 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0880 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0900 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0980 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]

EEPROM has been written from 'etsic0x65crc.bin'
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -s
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
MAC address : 08:60:01:00:80:02
Reg. domain : 168c
Capabilities: 6000
Bands:
HT 2G: HT20 HT40
HT 5G: HT20 HT40
CRC (stored): 0000
Calculating EEPROM CRC...............................
CRC (eval) : 52fe
root@ubuntu:~/Desktop/iwleeprom# ./iwleeprom -d 0000:02:00.0 -o new.bin
Using device 0000:02:00.0 [RW] AR928X Wireless Adapter (PCI-E)
IO driver: ath9k
HW: AR9280 (PCI-E) rev 0002
RF: integrated
Checking NVM size...
ath9k short eeprom base: 0 size: 512
Saving dump with byte order: LITTLE ENDIAN
0000 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0080 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0100 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0180 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0200 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0280 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0300 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0380 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0400 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0480 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0500 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0580 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0600 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0680 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0700 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0780 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0800 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0880 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0900 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0980 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0a80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0b80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0c80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0d80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0e80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f00 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]
0f80 [xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]

EEPROM has been dumped to 'new.bin'
root@ubuntu:~/Desktop/iwleeprom# md5sum etsic0x65crc.bin new.bin
e86d26449ead2c2ee27a5bac3d376ea8 etsic0x65crc.bin
9d90351fdfec197423e85fdc27d9bf0a new.bin
root@ubuntu:~/Desktop/iwleeprom# rmmod ath9k
root@ubuntu:~/Desktop/iwleeprom# modprobe ath9k

 

[RehabMan]

RM Sir,
plz, just give a hint..ive tried more 5x times...

It has been too long since I have been through the process.
No plans to look at it any time again, as I have transitioned most of my hardware to Broadcom WiFi/BT.

 

[siddsimac]

Thanks u RM Sir
I finally made it
All steps were right, the problem was on iwleeprom, so i use iwleeprom from MacNB and use the flag "-r" n its write to the ROM.

Locale: FCC
Country Code:

Sir i used "00", so got FCC as locale but No Country Code , Sir wat should use regdom for INDIA.