Appstore: Your device or computer could not be verified

[BestMan]

I have been suffering with this problem for few days and cannot consider it. This error I get in App Store when try to log in:

Your device or computer could not be verified. Contact support for assistance.

I have read that for some magical reason they need my ethernet card to verify my "mac". So I have recently found a working kext for my card, and i have it installed as an en0 as recommended. But I still can't get rid of this error in App Store.

 

[VioletDragon]

I have been suffering with this problem for few days and cannot consider it. This error I get in App Store when try to log in:

I have read that for some magical reason they need my ethernet card to verify my "mac". So I have recently found a working kext for my card, and i have it installed as an en0 as recommended. But I still can't get rid of this error in App Store.

Which Bootloader? is your Ethernet seen as en0?

 

[BestMan]

Which Bootloader?

clover

is your Ethernet seen as en0?

yes, in system report. BSD name right?

 

[VioletDragon]

Yes. BSD name en0. have you filled out rt Variables section in Clover Configurator? without ROM you can't log into App store.

 

[BestMan]

Yes. BSD name en0. have you filled out rt Variables section in Clover Configurator? without ROM you can't log into App store.

i have just googled this and found:

so what you actually need is mlb and mac address ethernet (off course ethernet must be en 0) from registered device or hardware on apple server, try this and i hope it will solve your iMessage login issue, except for amd machine, i don't know how it works

if you're using clover, make sure you have EmuVariableUefi-64.efi in drivers64UEFI's folder
1. open clover configurator
2. goto Rt Variables section, put MLB value = C02K7438DRVCN1S5A and ROM value = UEZdNpmp
3. goto SMBIOS section, put SmUUID value = 9DFF0000-3C12-0539-FFFF-50465D3699A9
4. and then reboot

and i do not have EmuVariableUefi-64.efi in drivers64UEFI's folder. What should i do?

 

[VioletDragon]

Yes only for UEFI Booting. Post config.plist from Clover.

 

[BestMan]

Yes only for UEFI Booting. Post config.plist from Clover.

here

 

[VioletDragon]

You have no ROM. also your SMBIOS section isn't configured properly. No Serial Number or Board Serial Number.

 

[BestMan]

You have no ROM. also your SMBIOS section isn't configured properly. No Serial Number or Board Serial Number.

what should i do then?

 

[VioletDragon]

Which System Definition do you use?