- Joined
- Dec 10, 2012
- Messages
- 14
- Motherboard
- GA-H170-HD3
- CPU
- i7 6700
- Graphics
- HD 530
- Mac
- Mobile Phone
Hi,
I'm about to finish my new Skylake build and recognized something very strange:
My PCIe Gigabit Network card (Sonnet GE1000LA-E) with native support on OS X is not working.
That's what I was able to find out:
* an attached network cable will be detected
* the OS starts sending DHCP requests, etc. (validated using tcpdump locally)
* the OS will never receive any packages (validated using tcpdump locally)
* the card never actually sends packages (validated using tcpdump on the other side)
Syslog:
Any ideas what's going on here?
I'm about to finish my new Skylake build and recognized something very strange:
My PCIe Gigabit Network card (Sonnet GE1000LA-E) with native support on OS X is not working.
That's what I was able to find out:
* an attached network cable will be detected
* the OS starts sending DHCP requests, etc. (validated using tcpdump locally)
* the OS will never receive any packages (validated using tcpdump locally)
* the card never actually sends packages (validated using tcpdump on the other side)
Syslog:
Code:
28.03.16 16:32:36,000 kernel[0] AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
28.03.16 16:32:36,000 kernel[0] AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event scheduler called in Init Level 0 or 1
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - FATAL: SkGeStopPort() does not terminate (Rx)
28.03.16 16:32:38,000 kernel[0] AppleYukon2: error - Event queued in Init Level 0
28.03.16 16:32:41,000 kernel[0] Ethernet [AppleYukon2]: Link up on en1, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac0c,0de1,0200,cde1,7800]
28.03.16 16:32:41,000 kernel[0] AppleYukon2: error - Uncorrectable PCI Express error
28.03.16 16:32:41,000 kernel[0] AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SK_DRV_ADAP_FAIL
28.03.16 16:32:52,000 kernel[0] AppleYukon2: error - Uncorrectable PCI Express error
28.03.16 16:32:52,000 kernel[0] AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SK_DRV_ADAP_FAIL
28.03.16 16:34:59,000 kernel[0] AppleYukon2: 00000000,00000000 skgehw - cppSkDrvEvent - SK_DRV_RX_OVERFLOW: rcv fifo overflow
Any ideas what's going on here?