See Post #1105,the problem is what should I select to create the patch
Expected. If nothing connected, no audio device available.None of these ports are recognized and show up in "sound".
HD4600 HDMI audio workingread post # 1110 and executed, step IoReg
No Advanced selection effects HDMI audioPatch/Advanced i have to use some options
Tells Clover to configure HD4600 graphicsI must also use Inject / Intel = true
Thank you, toleda. There are three video outputs from the motherboard, one DisplayPort and two HDMIs. It is the DisplayPort that is now connected to the Monitor via the same port. The monitor has built-in speaker and should produce sound (right? but it does not).Expected. If nothing connected, no audio device available.
What is the connected HDMI device?
IOReg shows an audio device on Port 0x7 (con2)
config.plist/Devices/Properties/PciRoot(0x0)/Pci(0x2,0x0) shows patches for:
con0: nothing connected, likely the DP port, HDMI type is incorrect, remove all patches
con1: nothing connected, likely an HDMI port, not used, test
con2: display connected, enable, type, flag patches required
Fix all connectors, restart, reply with new files
the only difference before entering the password on boot the apple becomes largeHD4600 HDMI audio working
No Advanced selection effects HDMI audio
Only if something is not working
Tells Clover to configure HD4600 graphics
Yes, the tool has no way to know what physical connector is.Is that wrong?
What does that have do with HDMI audio???the only difference before entering the password on boot the apple becomes large