Contribute
Register

AppleHDA HDMI Audio [Guide]

Not true, Method A is not present in the files attached/Post #1061

Voodoo is installed and disables AppleHDA. Only Post #1 mention, C. Unsupported

No. Asked and answered, Post #1062

One guide, Post #1.
Thanks for the info. Method A is saying to install Lilu/Whatevergreen, restart, framebuffer patch, and I did all these. AppleHDA.kext is present in S/L/E.

And I just deleted VoodooHDA.kext, still not working. What could I be missing?
 
No files attached, no clue; useless post
See Post #1/IV. Problem Reporting; attach all requested files
  1. Graphics looks good, but no audio over DP.
  2. 10.14/z270m/(Bios unknown)/Intel 7600k/XFX RX 570 4GB
  3. Followed Post #1 guide(install lilu/whatevergreen, restart, patch frame buffer with https://www.tonymacx86.com/threads/...ebuffers-for-high-sierra-using-clover.235409/, see clover config.plist for frame buffer patching)
  4. attached
  5. Terminal - 4 commands, attach Terminal output
    1. attached
    2. no output
    3. attached
    4. attached
  6. attached
  7. attached
  8. Clover
    1. attached
    2. none
    3. none
Thanks for the help!
 

Attachments

  • audio_issue2.zip
    2.3 MB · Views: 103
Followed Post #1 guide(install lilu/whatevergreen
Edit your profile for current graphics
IOReg: not present
Post #1/I. Before You Install HDMI Audio/AppleALC.kext, not present
Where and how did you install the kexts?
 
Edit your profile for current graphics
Sorry, edited.
IOReg: not present
It's present in the attachment, named "ioreg"
Post #1/I. Before You Install HDMI Audio/AppleALC.kext, not present
Where and how did you install the kexts?
AppleALC installed using multibeast, like this:
395777

I checked /L/E, AppleALC.kext is present. Here's a list of the kexts in /L/E:
395778


Maybe some of the items are outdated, since I've been playing with hackintosh for 3 years, but I'm not sure which ones.
 
Hi, my HDMI audio works only after I turn monitor off and on again. Ioreg returns
| "IOHDACodecVendorID" = 0x10ec0892
I have run problem reporting script as well as added AppleHDA.kext to zip folder as requested in line IV. post 1. I could not figure out what was meant by "Copy of IOReg - IOReg_v2.1 (Tools 2.)" so just copied the terminal output of requested commands into file "Terminal Ioreg log.txt"
I hope it is sufficient.
 
my HDMI audio works only after I turn monitor off and on again. Ioreg returns
| "IOHDACodecVendorID" = 0x10ec0892
Onboard, Realtek audio codec, not HDMI audio
I could not figure out what was meant by "Copy of IOReg - IOReg_v2.1 (Tools 2.)" so just copied the terminal output of requested commands into file "Terminal Ioreg log.txt"
Not correct, as noted in Post #1:
IOReg/File/Save a Copy As…, verify file opens
hope it is sufficient.
Not, no files attached
 
Back
Top