Using Skylake device_ids, why?
Which Kaby Lake device_ids did you try?
framebuffer-con1-type patch is not working
IOReg shows framebuffer-con2 patches, no framebuffer-con2 patches in config.plist; why?
Remove FakePCIID-Intel-HDMI-Audio.kext and FakePCIID.kext, if no other FakePCIID----.kextioreg in this post has my sony tv connected using hdmi but still no audio over hdmi
macOS Mojave does not support R9 Fury Nano HDMI audio device idThanks
Thanks,Remove FakePCIID-Intel-HDMI-Audio.kext and FakePCIID.kext, if no other FakePCIID----.kext
Intel HDMI audio codec is blank, verify BIOS/Integrated graphics sound/enabled
Restart, reply with all Post #1/Problem Reporting requested files
ioreg -rxn IOHDACodecDevice | grep VendorID
| "IOHDACodecVendorID" = 0x10ec1220
| "IOHDACodecVendorID" = 0xffffffff8086280b
ioreg -rxn AppleGFXHDADriver | grep vendorcodecID
output nothing
diskutil list
/dev/disk0 (internal):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme 250.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_APFS Container disk1 249.8 GB disk0s2
/dev/disk1 (synthesized):
#: TYPE NAME SIZE IDENTIFIER
0: APFS Container Scheme - +249.8 GB disk1
Physical Store disk0s2
1: APFS Volume Mojave 39.1 GB disk1s1
2: APFS Volume Preboot 45.0 MB disk1s2
3: APFS Volume Recovery 522.7 MB disk1s3
4: APFS Volume VM
Hot plug is noted as a workaround, Post #1/*Nvidia: Nvidia driver bugboot with DP>Hdmi, login and then unplug from reduction and plug hdmi to hdmi and voila i have working hdmi audio output