- Joined
- Sep 19, 2012
- Messages
- 8
- Motherboard
- GA-Z270X-Ultra Gaming
- CPU
- I7-7700K
- Graphics
- GTX 1080 Ti
- Mac
-
- Mobile Phone
-
I do have an Apple Thunderbolt Cinema Display which i am currently trying to setup with GIGABYTE MB GA-Z77X-UP5-TH.
I was able to connect it to the onboard Thunderbolt of the mb and i able to display properly during the BIOS interface. I am able to boot to windows currectly but when booting to macOS Hackintosh the screen splits into 6 smaller view with a big raster covering almost the entire screen. For a better understanding i have been able to attach screen shots of what this look like below:
Please, can anybody help with solving this issue
????
Note:
I have seen similar thing by others and below are the links:
Late 2018 Mac mini + WX 9100@32Gbps-TB3 (Mantiz Venus) + Thu...
It's possible to produce Thunderbolt 3 monitor output with an add-in-card such as GC-ALPINE-RIDGE. I tested it with the AKiTiO Node Duo through its du...
egpu.io
2018-mac-mini-mantiz-venus-wx-9100-egpu-gc-alpine-ridge-thunderbolt-3-monitor-output-powered-on.jpg
Here is my question relating to this Article:
I have checked in the article and cannot find the "Thunderbolt Card Power Cable" and how it was connected to the card?
Please, can anyone shed more light on how the cable was made (if DIY) and powered or where we can buy the cable?
I was able to connect it to the onboard Thunderbolt of the mb and i able to display properly during the BIOS interface. I am able to boot to windows currectly but when booting to macOS Hackintosh the screen splits into 6 smaller view with a big raster covering almost the entire screen. For a better understanding i have been able to attach screen shots of what this look like below:
Please, can anybody help with solving this issue
????Note:
I have seen similar thing by others and below are the links:
Late 2018 Mac mini + WX 9100@32Gbps-TB3 (Mantiz Venus) + Thu...
It's possible to produce Thunderbolt 3 monitor output with an add-in-card such as GC-ALPINE-RIDGE. I tested it with the AKiTiO Node Duo through its du...
egpu.io
2018-mac-mini-mantiz-venus-wx-9100-egpu-gc-alpine-ridge-thunderbolt-3-monitor-output-powered-on.jpg
Here is my question relating to this Article:
I have checked in the article and cannot find the "Thunderbolt Card Power Cable" and how it was connected to the card?
Please, can anyone shed more light on how the cable was made (if DIY) and powered or where we can buy the cable?
Last edited: