- Joined
- Dec 11, 2012
- Messages
- 70
- Motherboard
- Gigabyte Designare Z390
- CPU
- i9-9900K
- Graphics
- RX 580 + GTX 980 Ti
it is not as complex as it sounds
Ok thanks I'll check it out
it is not as complex as it sounds
Ok thanks I'll check it out
Have you seen this thread? https://www.tonymacx86.com/threads/...390-thunderbolt-3-i7-9700k-amd-rx-580.316533/
i'm having trouble knowing which part of guide to follow. I see the latest ones use HackinDROM is this the one to use?Have you seen this thread? https://www.tonymacx86.com/threads/...390-thunderbolt-3-i7-9700k-amd-rx-580.316533/
i'm having trouble knowing which part of guide to follow. I see the latest ones use HackinDROM is this the one to use?
i'm trying this one tonight for transfering from clover to OC. and then I'll do the AppleVTD thing for my discrete 8 to work...i'm having trouble knowing which part of guide to follow. I see the latest ones use HackinDROM is this the one to use?
Good luck, make a backup, and have a bootable version of your current clover configuration. Then be sure to check for remnants of clover and then set up your new USB drive with OpenCore. https://github.com/dortania/OpenCore-Install-Guide/tree/master/clover-conversioni'm trying this one tonight for transfering from clover to OC. and then I'll do the AppleVTD thing for my discrete 8 to work...
** Mini-Guide: How to Replace Clover with OpenCore **
[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580
In the OpenCore guides in this thread for Designare will this work for a completely fresh install of Catalina and Opencore? Without the need to port across anything from my Clover install? New serial numbers etc. It may be naive of me, but as I don't know what is causing Logic Pro to not...www.tonymacx86.com
** Enabling AppleVTD on Z390 Designare with No Impact to WiFi/Ethernet **
[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580
Unlike @luckyal who's Slate driver seems to not want to stick on reboots, this does once reinstalled. Everything seems to be working now. I had to uninstall and reinstall VRS8 driver with SIP disabled so that the system security properly registers the vendor. For whatever reason it didn't want...www.tonymacx86.com
Good luck. Let me know how it goesi'm trying this one tonight for transfering from clover to OC. and then I'll do the AppleVTD thing for my discrete 8 to work...
** Mini-Guide: How to Replace Clover with OpenCore **
[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580
In the OpenCore guides in this thread for Designare will this work for a completely fresh install of Catalina and Opencore? Without the need to port across anything from my Clover install? New serial numbers etc. It may be naive of me, but as I don't know what is causing Logic Pro to not...www.tonymacx86.com
** Enabling AppleVTD on Z390 Designare with No Impact to WiFi/Ethernet **
[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580
Unlike @luckyal who's Slate driver seems to not want to stick on reboots, this does once reinstalled. Everything seems to be working now. I had to uninstall and reinstall VRS8 driver with SIP disabled so that the system security properly registers the vendor. For whatever reason it didn't want...www.tonymacx86.com
Thanksit is not as complex as it sounds
there is mention here:
An iDiot's Guide To iMessage
Actually this is less of a guide and more of an explanation of the procedures that I use in my own builds in order to enable access to the App Store, iMessage and FaceTime. Do not be offended by the term 'iDiot', it is not intended as an insult but more my attempt at a humorous play on words...www.tonymacx86.com
so 2 days later and after few little (big questionmarkss) errors I finally got it working. My antelope discrete 8 works through thunderbolt! on MojaveGood luck. Let me know how it goes
Thats the stuff!so 2 days later and after few little (big questionmarkss) errors I finally got it working. My antelope discrete 8 works through thunderbolt! on Mojave