- Joined
- Mar 23, 2011
- Messages
- 15
- Motherboard
- Gigabyte GA-Z97X-Gaming 5
- CPU
- i7-4790K
- Graphics
- HD 4600 + GTX 1060
- Mac
- Mobile Phone
The value of "12" for the pipe i got from @rehabmans HDMI audio guide and the flag value of "06" i got from a system where HDMI was already working ....
You could try changing the "pipe" to 12 on both the HDMI and DVI port and set the HDMI flag value to "06" as for the flag value of your DVI port .. I cant help you that ..
Cheers
Jay
Managed to get it to work after checking comments in some boards from @rehabmans and multiple tries.
I had to change my SMBIOS to Mac 14,3, now even the VDA Decoder says "fully supported" and had to switch the HDMI to the main display (2560x1440) and the DVI to the secondary display (2560x1080).
But a new issue showed up and I don't even know how to search online if anyone has it.
Let me show you with the attachment.
My secondary screen is showing only part of the image on screen. If I take a screenshot of the screen itself the full picture comes out. I tried to force other resolutions but to no end.
Not even sure why its only showing a partial image, because if I pull the HDMI cable out he will start showing the full image with no issue. Only with both screens he does this.
Have you ever seen a case like this or have an idea on what can cause it?
thanks for any help you can provide.