AMD Radeon Performance Enhanced SSDT

[wstrohm]

My "Geek5" (actually GB 5.1.1) below. SMBIOS iMac 19,1 - Mojave 10.14.6 (build 18G4032), RX 580 Nitro+, top switch on card in rear position ("quiet") so not peak-performance setup. No SSDT compared with SSDT v 1.0 installed in ACPI/patched. No SSDT on left, with SSDT on right. Will follow with results in switch's "performance" position.

 

[mattystonnie]

My "Geek5" (actually GB 5.1.1) below. SMBIOS iMac 19,1 - Mojave 10.14.6 (build 18G4032), RX 580 Nitro+, top switch on card in rear position ("quiet") so not peak-performance setup. No SSDT compared with SSDT v 1.0 installed in ACPI/patched. No SSDT on left, with SSDT on right. Will follow with results in switch's "performance" position.

View attachment 466119View attachment 466121

Use Catalina, was made for it.

 

[kobever]

GEEKBENCH 5.1.1 (best scores)
With SSDT (without Clover Injection of FB)
Metal 52031
Metal 52043 (after sleep/wake)
OpenCL 43683
OpenCL 46310 (after sleep/wake)

Without SSDT (with Clover Injection of FB Orinoco, Inject ATI)
Metal 51217
OpenCL 44676

• SMBios iMac 18,2
• Sapphire RADEON RX 580 8GB GDDR5 PULSE
• Catalina 10.15.4
• Lilu 1.4.3, WEG 1.3.8

IOReg dump (with SSDT, without clover injection)

 

[wstrohm]

Okay, SSDT made for Catalina, I understand. Nevertheless here are my results with the top switch of my RX 580 Nitro+ in its "performance" position. No SSDT (on left) vs. with SSDT (on right). In Mojave!

 

[yellocab]

Hi @yellocab Could you take a look at my config and suggest a procedure? I tried the one that is described here (with dummy kext + ssdt table) but no success. I tried the RB kext, that worked, but fans were spinning all the time at max. I think I might have implemented something in a wrong way. I would be very grateful if you could take a look, thanks!

PS: I have a Sapphire Vega 56.

Sorry but our builds are really different.

On my build:
My iGPU is disabled SMBIOS iMacPro
No graphic patch (GFX to iGPU PEGP to EGP0)
No darkwake

Yellocab

 

[Maf3r0]

Ioreg pls and test after a sleep/ wake cycle.

 

[macnb]

Ioreg pls.

Here you go. IOREG after applying the attached SSDT.

 

[yellocab]

Hi

juste tried the last beta 10.15.5 (19F72f) with the 2.3 revision of the Wonderfull SSDT and the wake/sleep pb is back.

With the 10.15.4 this afternoon I had a crazy fan moment after a mail research (possible??). Otherwise everything is perfect.

 

[rankrotten]

RX5700XT before and after sleep.

 

[barad1tos]

Hi, guys! I don't know if there was a question, but.. is there SSDT for RX590? That's quite similar to RX580.