AMD Radeon Performance Enhanced SSDT

[Namok88]

You might want to check the guide to add fan control to it

[TOOL] VGTab: Control your Vega in macOS without flashing the vBios

Now you can control your Vega on macOS without flashing the vBios As we know, the Vega graphics cards have native support in macOS HighSierra and Mojave. emmm...and some glitch :( But AMD uses a function called "SoftPowerPlayTable" to control the Vega cards. "Soft" means it can be stored in the...

www.tonymacx86.com

[GUIDE] Injection of AMD Vega Power and Fan Control Properties

Injection of Device Properties for Power and Fan control Last updated 14th May 2019 Update: MacOS Mojave 10.14.5+ includes a major overhaul of the Vega GPU drivers which should resolve all the power and fan control issues with most Vega cards and thus should make the methods outlined in this...

www.tonymacx86.com

 

[HackinMax]

Works on MasterZee build with GB Aorus Gaming 7 and Sapphire RX 5700XT.

Thanks for posting the fixes.

 

[KTBall1004]

Hey mattystonnie I am using an Asus TUF z390 MoBo with i5 9600k and a RX 5500 XT for my build. I used your patch for my MoBo to fix the hanging issue during installation but now, it will finish loading and just sit at a black screen. I tried using this guide/patch to fix this but still no luck. I am able to boot into the Language selection screen if I use my CPU graphics however I want to use my GPU for graphics. Should I finish the installation using my CPU graphics and setup my GPU after with MultiBeast? Or do you have any suggestions? This is my first build and I am new to Hackintosh so any help is appreciated!

 

[mattystonnie]

Hey mattystonnie I am using an Asus TUF z390 MoBo with i5 9600k and a RX 5500 XT for my build. I used your patch for my MoBo to fix the hanging issue during installation but now, it will finish loading and just sit at a black screen. I tried using this guide/patch to fix this but still no luck. I am able to boot into the Language selection screen if I use my CPU graphics however I want to use my GPU for graphics. Should I finish the installation using my CPU graphics and setup my GPU after with MultiBeast? Or do you have any suggestions? This is my first build and I am new to Hackintosh so any help is appreciated!

Hello there,

What booloader are you using?

Yes finish the install with the onboard graphics.

For the AMD GPU you need to add boot args : agdpmod=pikera

 

[tedyun]

Just a hunch -- others have had this problem with the Navi board. Can you try a different port on your video card? Others have found with the 5700 XT that some of the DP ports did not output a signal.

Hey mattystonnie I am using an Asus TUF z390 MoBo with i5 9600k and a RX 5500 XT for my build. I used your patch for my MoBo to fix the hanging issue during installation but now, it will finish loading and just sit at a black screen. I tried using this guide/patch to fix this but still no luck. I am able to boot into the Language selection screen if I use my CPU graphics however I want to use my GPU for graphics. Should I finish the installation using my CPU graphics and setup my GPU after with MultiBeast? Or do you have any suggestions? This is my first build and I am new to Hackintosh so any help is appreciated!

 

[KTBall1004]

Hello there,

What booloader are you using?

Yes finish the install with the onboard graphics.

For the AMD GPU you need to add boot args : agdpmod=pikera

I used the Unibeast Catalina bootloader

Just a hunch -- others have had this problem with the Navi board. Can you try a different port on your video card? Others have found with the 5700 XT that some of the DP ports did not output a signal.

I a using the HDMI port on my video card right now if that's what you mean.

 

[tedyun]

Maybe try the different Displayports? That worked for some other people.

I used the Unibeast Catalina bootloader



I a using the HDMI port on my video card right now if that's what you mean.

 

[KTBall1004]

I used the Unibeast Catalina bootloader



Also, I just booted using the CPU Graphics and this was the error that came up.

 

[KTBall1004]

Maybe try the different Displayports? That worked for some other people.

I posted a picture of my verbose error on page 87 of this thread, could you check it out.

Thanks!

 

[KTBall1004]

Hello there,

What booloader are you using?

Yes finish the install with the onboard graphics.

For the AMD GPU you need to add boot args : agdpmod=pikera

Hey mattstonnie, I was trying to finish the install with the onboard graphics but when I "Booted from MacOS" I get this verbose error:

I tried removing all the kext files from the kexts>other folder in my EFI and the same thing happened. Any ideas on what this issue is or how I can fix it?