Contribute
Register

AMD/Nvidia Primary Display with AirPlay Mirroring

Status
Not open for further replies.
Toleda hi! Tell me, does AirPlay work with my monitor? Or only with AppleTV ?? I can not get an image from the iPhone to the monitor!
 
@toleda No Airplay?

I used this setting;

BIOS Primary PEG and CSM Disabled
RadeonDeInit=true
injectATI=true
injectIntel=true
ig-platform-id=19120001
Remove IntelGraphicsFixup.kext

I also tried ssdt version it doesn't work either.
  1. No AirPlay
  2. 10.13.4 /ASUS Z170-A/3703/6700k/Asus ROG RX560
  3. Method 1
  4. Attached
  5. Attached
  6. Clover
    1. Attached
    2. Attached
    3. Attached
 

Attachments

  • Archive.zip
    893.3 KB · Views: 116
Last edited:
tell me why if all the graphics work correctly, I have a test in FCPX with BruceX 5K is longer than on the i3-3245 processor?
FCPX not optimised for Nvidia (rather Nvidia not optimised for macOS OpenCL).
I sold my Nvidia 650 - it took 1m 40 secs on BruceX test.
Use AMD instead.
On my i7-3770K + AMD Sapphire Nitro+ RX580 8GB, my BruceX test took 15secs.

Or ditch FCPX & switch to Adobe Premier with Nvidia which is better optimised with CUDA.
 
Hello @toleda , frist of all thank you for your contributions to the customac world I followed several guides from you to get my system in top shape.

Second I hope you can guide me, I went down the rabbit hole between different guides for power management, dGPU power management and this guide to enable airplay mirroring on dGPU and im afraid I must have a setting conflicting with another in order to enable airplay.

Aus z270e mobo
intel 7700k
GTX1080Ti
im only loading 1 ssdt file ssdt-xcpm.aml

For this guide started with this
BIOS enable IGPU, set dGPU as primary,
  1. Framebuffer: IGPlatformID=59120003
  2. SysDef: imac18
Then I went with Clover setup step 1
Graphics/
  1. Inject/Intel/YES
  2. ig-platform-id/
    • HD630: 59120003
and I also tried Step 2 with ssd-hdmi and other clover changes but also didn't work. I am assuming I have other settings conflicting with this guide but I can't figure out what/where.

Thanks!
 

Attachments

  • ioreg_export.ioreg
    7.6 MB · Views: 190
  • config.plist
    13.5 KB · Views: 229
  • Screen Shot 2018-04-06 at 7.37.08 PM.png
    Screen Shot 2018-04-06 at 7.37.08 PM.png
    52.3 KB · Views: 220
  • SSDT-XCPM.aml
    187 bytes · Views: 179
I think @toleda is busy he didn't answer our calls yet. But after I tried 100 variations finally I figure it out and my Airplay is working now. And I didn't add anything. Here is what I did;

1. Moved all kexts to Clover/Other
2. Install latest IntelGraphicsFixup.kext (v1.2.6) to Clover/Other
3. BIOS set PEG is primary IGPU Multi monitor Enabled DVMT 128MB
4. Restart

Both Graphics and Airplay is working;

Screen Shot 2018-04-09 at 19.25.50.png

Screen Shot 2018-04-09 at 19.26.53.png


I just want to learn from @toleda How can I check to Airplay is active on ioreg where should I look for that.

I also checked Native GPU and it looks active;

Screen Shot 2018-04-09 at 19.54.20.png

Screen Shot 2018-04-09 at 19.54.36.png
 
enable airplay mirroring on dGPU
dGPU does not support AirPlay Mirroring
iGPU is configured properly for AirPlay Mirroring
Attach a screenshot of System Preferences/Sound/Output
 
Status
Not open for further replies.
Back
Top