- Joined
- Jan 31, 2011
- Messages
- 89
- Motherboard
- HP ProBook 4530 | HP ProBook 5330m | Intel NUC BOXD54250WYKH1 | Alienware Alpha
- CPU
- i3-2350m | i3-2350m | i5-4250U | i3-4130T
- Graphics
- Intel HD 3000 | Intel HD 5000 | NVIDIA Geforce GTX 860M 2989 MB
- Mac
- Classic Mac
- Mobile Phone
Semi-success!
I followed the instructions set above and was able to get my Mountain Lion installation to recognize the new wireless card. My test bed is a Probook 4530s A7K05UT#ABA. I used a BCM94322HM8L (verified to work in one of my custom builds). I received the BIOS white-list warning, but after running through the steps my install recognized it. I had to manually hit the Wifi button next to the screen to get it to search for network. This is where it got a little wonky. It would search for networks, but I could never officially switch the Wi-Fi on. No networks are found, but in About this Mac > System Information it reads this cards and all the channels it goes up to. Somewhere in the 160's if I remember correctly.
I had to quickly put my Atheros back in because I need a reliable connection.
Please let me know what suggestions any of you may have!
You will need to use the hard-switch to get the wireless card to turn on (turn it off n then on again). I had to use that trick to get the wireless to work. I posted the problem in the first post :
"2. Everytime I boot into OSX/Windows I have to hard switch the wifi to on and off in order for it to start seeing the networks. Any way around this?!"