ALC 887 problems

[bashirov.artur]

Hi guys! I've build a new Hackintosh with Gigabyte H110TN which has Realtek Alc887. I used vit9696 AppleALC method. Also VoodooHDA have been tried. There are several problems: 1. - HDMI audio won't work. 2. - Audio level is too low. Sound is too
quiet. 1150 is as twice louder than 887. 3. Pink(Mic In) Doesn't work with AppleALC. There is only Internal mic in devices. With VoodooHDA it works. How can i make vit9696 AppleALC get to work with mic and how to get sound level higher? Thanks in advance

 

[toleda]

used vit9696 AppleALC method

What layout_id?

 

[bashirov.artur]

What layout_id?

Now it's 2. But I tried 1, 2,3,4,5,7,9 with same result on low volume. None have made mic working.

 

[toleda]

None have made mic working

Custom audio devices; similar to NUC.
Try Line In.

 

[bashirov.artur]

Custom audio devices; similar to NUC.
Try Line In.

I don't have Line in((( And what about low volume?

 

[toleda]

I don't have Line in

Set Audio ID: 1
Restart, try Internal Microphone and Line In.

 

[bashirov.artur]

Set Audio ID: 1
Restart, try Internal Microphone and Line In.

I set AudioID to 1. Right now Line In appeared, but not working. Also I don't have sound anymore(( I can adjust Volume level, but no sound at all. Thank you for helping me)

 

[toleda]

Internal Microphone??

 

[bashirov.artur]

Internal Microphone??

Yes! Microphone is working now(at least signal scale reacting on) But now there is no audio. I've checked all devices

 

[toleda]

Only 1 input and 1 output will ever work.
See No Sound - Realtek ALC AppleHDA/Post #1/I. No Sound
If no success, see Post #1/Problem Reporting
Post to linked thread with requested attachments.