Airport Utility 6.0 Update

[Mike Poole]

Updated, and no, there's no functionality lost, despite the UI makeover, which I consider an improvement on the last version.

I am missing quite a few functions in the timecapsule settings,
ntp config settings,
enable/disable internet setup via bonjour,
wireless:
Allow the network to be extended option.
No MAC access control option.
Internet Connection Options ( Connect using Ethernet/PPPoE ,
Connection Sharing: Off, Share Public, Distribute a Range)
No USB printer option
No Advanced Option, Logging settings, IPv6 Options

Hi Peter:

The network extension option is still there. Click on the wireless tab after choosing to edit your settings.

My USB printer is still working so I expect that its now an automatic selection if a printer is plugged in.

The connection options still include PPPoE (under Connect Using on the Internet tab).

MAC control is still there, but buried deeper. Its available when adding a DHCP reservation on the network tab. Also, check the Enable Access Control box, click on Timed Access Control, then click on the plus box beneath Wireless Clients.

Not sure about the others yet but you seem to be correct. I added a link to my original post about a TUAW article covering what's missing.

 

[wenyce]

updated no problem

 

[smvassallo]

I installed it by mistake for my ralink wireless card, upon reboot kernel panic had to reinstall osx