<< Solved >> After Multibeast it does not reboot

[Errabundo]

Hello.
I have tried several times to install Catalina with no success.

Gygabite Z390 Designare
i7-9700k
Radeon Saphire RX580

I install successfuly the whole Catalina, open the USB and install Multibeast.
After that, when rebooting I see the apple logo, and at 3/4 of the bar advance, there are some rays at the screen and all goes black.

I tried enabling and disabling the internal graphic IGPU, but the result is the same.

Any idea what's happening?
Thank you!
Fernando

 

[UtterDisbelief]

Hello.
I have tried several times to install Catalina with no success.

Gygabite Z390 Designare
i7-9700k
Radeon Saphire RX580

I install successfuly the whole Catalina, open the USB and install Multibeast.
After that, when rebooting I see the apple logo, and at 3/4 of the bar advance, there are some rays at the screen and all goes black.

I tried enabling and disabling the internal graphic IGPU, but the result is the same.

Any idea what's happening?
Thank you!
Fernando

Hi there.

You don't say what you installed with MultiBeast. You need the Graphics Configuration open and the first option selected:

If you have problems with the UniBeast installer itself, there may be a different solution as it will have these already installed.

 

[Errabundo]

Thank you for your help.
you are right. I didn’t install that because I didn’t know.
Now I have to reinstall all from the beginning, doesn’t it?
I find no way of starting again IOS and Multibeast.

 

[UtterDisbelief]

Thank you for your help.
you are right. I didn’t install that because I didn’t know.
Now I have to reinstall all from the beginning, doesn’t it?
I find no way of starting again IOS and Multibeast.

No, you can just run MultiBeast again and select the Graphics option I show. If you are running it from your UniBeast installer, make sure you select the main drive as your destination

 

[Errabundo]

Thank you Utter. But as the graphic drives was not installed properly, it was imposible to execute Multibeast. Catalina doesn’t starts.

but I reinstalled all from the beginning, and with your option it was successful!!

But the next problem is the computer doesn’t shut down. I try to switch it off, and it starts again by itself!!

I have not installed yet the fenvi T919 card. Tomorrow morning I’ll try it.

thank you!