Contribute
Register

After "[IOBluetoothNCIController][Start] -- completed" OS X won't boot. Screen with Apple Logo just

Status
Not open for further replies.
Joined
Mar 22, 2013
Messages
3
Motherboard
osx
CPU
i5
Graphics
650ti
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
After "[IOBluetoothHCIController][Start] -- completed" OS X won't boot. Screen with Apple Logo just hangs.

Apologize in advance, noobie here. Spent hrs reading and trying fixes. To no avail.

Z77x-UP5TH Mobo
Intel i5 CPU
Internal graphics card H4000


Installed ML but Unibeast boot from SSD not booting. Just Apple logo with spinning wheel indefinitely.

I Did a Verbose Boot from Flash Drive.

Last few Lines are

0007-adaptor is out of date make sure kext has been build against the correct headers
can't load kext com.apple.driverApleUSBmergenub-link failed
Failed to load kext. apple.driver. etc (same as above)
error 0xdc0080
"[IOBluetoothHCIController][Start] --completed"
AppleIntelE1000e: Ethernet address 90:2b etc....


What boot flags are needed to fix this. Or, how do i fix this?




:crazy::crazy::crazy:
 
Which I5 ? It needs to support HD3000/HD4000 graphics or you need a compatible GPU? Also don't use VGA output.

The graphics drivers are loaded after bluetooth, but it seems they can't load on your system.
 
Intel i5 w/ HD Graphics 4000
 
Status
Not open for further replies.
Back
Top