After Installation, Lost Audio

[toleda]

Mojave does not support Audio ID/layout-id = 1 or 3.
Temporary workarounds:
a. set Audio ID/layout-id = 2 (Desktop: 887, 888, 889, 892, 898, 1150, 1220 only)
b. AppleALC.kext only, see Workaround incompatible layouts · vit9696

Permanent fix:
a. New Audio IDs added to current solutions, TBD.

 

[rohith]

Mojave does not support Audio ID/layout-id = 1 or 3.
Temporary workarounds:
a. set Audio ID/layout-id = 2 (Desktop: 887, 888, 889, 892, 898, 1150, 1220 only)
b. AppleALC.kext only, see Workaround incompatible layouts · vit9696

Permanent fix:
a. New Audio IDs added to current solutions, TBD.

toleda my audio is ALC 888b .. layout id is in 2 in clover but no audio

 

[carpentryplus25]

toleda my audio is ALC 888b .. layout id is in 2 in clover but no audio

As Toleda said you must set to layoutID 2 and use AppleALC.kext. You must also use Lilu.kext with bootlargs -lilubeta -alcbeta.
Lilu.kext and AppleALC.kext must be in the same folder.

 

[scottkendall]

What does the layout ID do because mine was 5 before Mojave and mine is 5 now.

To get Audio working I use updated to 1.2.8 AppleALC and added the -lilubetaall flag.

 

[toleda]

audio is ALC 888b .. layout id is in 2 in clover but no audio

See No Audio Devices - AppleHDA Realtek Audio/Post #1/Problem Reporting. Post to thread linked with requested files attached.

 

[toleda]

mine was 5 before Mojave and mine is 5 now

Audio ID: 5 is not supported on this site

 

[scottkendall]

Audio ID: 5 is not supported on this site

Good thing I was not looking for support on audio. I was asking what the id was for in general no specific number. Because for the most part mine just worked.

 

[diep90]

use applealc 1.2.8. it works for me

 

[TheEdge_]

I am using applealc 1.2.8 . and also booting with -alcbeta , alcid= ,alcaaplid and -lilubetaall

But what ever layoutid i use i have still no audio..

My audio is ALC1220a anyone got this to work??

Here is my config.plist is there anything wrong with this..

 

[scottkendall]

I am using applealc 1.2.8 . and also booting with -alcbeta , alcid= ,alcaaplid and -lilubetaall

But what ever layoutid i use i have still no audio..

My audio is ALC1220a anyone got this to work??

Here is my config.plist is there anything wrong with this..

I just use Lilubetaall, I do not know what all that other stuff is for.

Layout 2 I think is out the window and that's what your config says you are using.

Someone also said that removing whatevergreen if you have that fixed their sound issue though it might have just been coincidence.