Contribute
Register

Adding audio codec AppleALC

Status
Not open for further replies.
reply with new IORegs and Terminal output - #2

Let's see how this works (force-delete kext using sudo rm -rf /.../... to remove old kexts from drive)

Files attached for Mojave 10.14.1 for latest AppleALC and Lilu (post # 98). Mojave 10.14.2 to follow.
 

Attachments

  • 10141_Files_Tues1250PM.zip
    1.5 MB · Views: 126
Last edited:
What is the best way to avoid multiple codecs when testing revised kexts?
Nothing you can do, controlled by source files and what is compiled.
Does KextBeast remove old kext or replace with new kext?
Don't know. I remove kexts manually before running KextBeast
Post #74+ issues occurred after moving old kexts to Trash and running cVad's kext utility and then installing new kext with KextBeast.
Post #74+ issues were my mistake
 
Files attached for Mojave 10.14.2
Thanks.
Likely, the ALC1200 will replace the 887/892. If true, 5/6 port audio is necessary.
New layouts:
Layout 1 is 5/6 port audio, native - 2 inputs/5 or 6 outputs
Layout 2 is 3 port audio, repurposed - 0 inputs/3 outputs (same as layout 2, previously)
Layout 3 is 3 port audio, native - 2 inputs/1 output (same as layout 1, previously)
Note. front panel/SPDIF are the same for all layouts - 1 input/1 output/1 digital output, ignored

Try attached. Reply with IORegs and Terminal output
Backup installed AppleALC.kext
 

Attachments

  • 1.3.4 (DEBUG).zip
    789.5 KB · Views: 134
Reply with IORegs and Terminal output

10.14.2 Files attached for Layout = 1, (2, 3 - for confirmation) for latest AppleALC (post #104), Lilu (post #98)

Note 'Output' screenshot for Layout = 3 - is this expected?
 

Attachments

  • 10142_Files_Wed431PM.zip
    2.3 MB · Views: 128
Last edited:
Apologies, new Forum software goes to last unread rather than first unread; my error.
Note 'Output' screenshot for Layout = 3 - is this expected?
Thanks
Actually, layouts 1 and 3 have minor pinconfig problems, some tuning required.
 
Last edited:
Actually, layouts 1 and 3 have minor pinconfig problems, some tuning required.

Maybe the name of this thread should be changed to "S1200A audio codec for AppleALC" to avoid confusion. @Toad and maybe others are beginning to install and run 1.3.4(Debug).kext.
 
maybe others are beginning to install and run 1.3.4(Debug).kext.
All codecs are included yesterday's and today's attached kexts.
Try attached. If audio devices present, only reply with SysPref/Sound screenshots.
 

Attachments

  • 1.3.4 (DEBUG).zip
    790.8 KB · Views: 130
Status
Not open for further replies.
Back
Top