Contribute
Register

Acer Aspire V15 V3-574G-53WB. Catalina 10.15

Status
Not open for further replies.
Im trying to use an usb (hopefully is a USB 2.0, i dont really know) and making a new bootable in it.

Maybe is that the problem the other USB i was using it was an 1TB Hard Disk.
 
you could try adding USBInjectAll.kext and also list it in your config.plist
Added and still getting same error, should i try using this command in the boot arg? ncpi=0x2000
 
Anyone can help me to solve that problem? Im stuck at HID: Legacy shim 2, i cant' figure it out what is the problem!

Changed usb port on the laptop, tryed with all 3 usb ports.
Changed from a 1tb hard disk drive to a pendrive of 8gb, still nothing.
I tryed aswell with USBInjectAll.kext, and nothing.
I post here the EFI Folder.
 

Attachments

  • photo5909151959187830385.jpg
    photo5909151959187830385.jpg
    176.4 KB · Views: 28
Anyone can help me to solve that problem? Im stuck at HID: Legacy shim 2, i cant' figure it out what is the problem!

Changed usb port on the laptop, tryed with all 3 usb ports.
Changed from a 1tb hard disk drive to a pendrive of 8gb, still nothing.
I tryed aswell with USBInjectAll.kext, and nothing.
I post here the EFI Folder.
try a usb stick, 16gb. sandisk makes a good installer
 
try a usb stick, 16gb. sandisk makes a good installer
Do you think the USB brand is so important??
I'll try with another usb brand in next days
 
Do you think the USB brand is so important??
I'll try with another usb brand in next days
sometimes it can be

also using a 1tb drive is wrong

make sure to reset nvram when trying new options
 
sometimes it can be

also using a 1tb drive is wrong

make sure to reset nvram when trying new options
I tryed with a 4GB SanDisk, but i reach at exactly the same point as before...
I dont think the USB is the problem :(
 
I tryed with a 4GB SanDisk, but i reach at exactly the same point as before...
I dont think the USB is the problem :(
please read the faq for proper hardware profile setup:
 
I get in another step right now, i get some progress than before!

Debugger not configured. Hanging.

Thats the point where i am now, if you have any suggestion ill be awesome! :)
Thanks for your help!
 

Attachments

  • photo5911474024666477807.jpg
    photo5911474024666477807.jpg
    330.3 KB · Views: 36
I get in another step right now, i get some progress than before!

Debugger not configured. Hanging.

Thats the point where i am now, if you have any suggestion ill be awesome! :)
Thanks for your help!
read my previous reply
 
Status
Not open for further replies.
Back
Top