- Joined
- Oct 29, 2014
- Messages
- 4
- Motherboard
- Gigabyte GA-Z97-D3H
- CPU
- i3-4130
- Graphics
- GT 740
Hi, after many and many and many tests to have a working installation of Mavericks, finally I have a successful osx installed in my laptop, although some devices are not supported (wifi and audio codec).
My system definition:
System: ACER ASPIRE E1-570G
CPU: Intel Core i3 3227U Ivy Bridge GT2
Graphics: Intel(R) HD Graphics 4000 2048 Mbytes / NVIDIA GeForce GT 740M 2112 Mbytes
Video res: 1366 x 768
MB Chipset: Ivy Bridge
SouthBridge: HM77
BIOS: Insyde Corp v. 2.06 10/08/2013
Motherboard: ACER EA50_CX chipset Intel HM77 (Panther Point)
Audio Controller: Intel Panther Point PCH High Definition Audio Controller VEN 8086 DEV 1E20C
High Definition Audio Codec: Realtek VEN 10EC DEV 0282
Wireless Card: Atheros AR9565 Wireless Network VEN 168C DEV 0036
Network: Broadcom BCM57786 NetXtreme PCI-E Gigabit eth. controller VEN 14E4 DEV 1683
I focused on Power Management following these two guides:
http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html
and this:
http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html
but something not working right, because Intel Power Gadget gives a CPU frequency of 0,80 Ghz, and also HW Monitor indicates 792 Mhz. Moreover I see that in History Graphs of HW Monitor there are missing Fans & Pumps and Voltages.
This is my /Extra/org.chameleon.Boot.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>IGPlatformID</key>
<string>01660009</string>
<key>Kernel Flags</key>
<string></string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>GenerateCStates</key>
<string>No</string>
<key>GeneratePStates</key>
<string>No</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>DropSSDT</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
</dict>
</plist>
and /Extra/smbios.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>05/10/12</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBA51.88Z.00EF.B00.1205221442</string>
<key>SMboardproduct</key>
<string>Mac-2E6FAB96566FE58C</string>
<key>SMfamily</key>
<string>MacBook Air</string>
<key>SMmanufacturer</key>
<string>Apple Inc.</string>
<key>SMproductname</key>
<string>MacBookAir5,2</string>
<key>SMserial</key>
<string>C02KV268DRVC</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>
attachments: HW Monitor screenshots, DSDT.aml, SSDT.aml, and IOReg file acer_e1_570g.
What's wrong with my configuration?
Thanks for any help!
My system definition:
System: ACER ASPIRE E1-570G
CPU: Intel Core i3 3227U Ivy Bridge GT2
Graphics: Intel(R) HD Graphics 4000 2048 Mbytes / NVIDIA GeForce GT 740M 2112 Mbytes
Video res: 1366 x 768
MB Chipset: Ivy Bridge
SouthBridge: HM77
BIOS: Insyde Corp v. 2.06 10/08/2013
Motherboard: ACER EA50_CX chipset Intel HM77 (Panther Point)
Audio Controller: Intel Panther Point PCH High Definition Audio Controller VEN 8086 DEV 1E20C
High Definition Audio Codec: Realtek VEN 10EC DEV 0282
Wireless Card: Atheros AR9565 Wireless Network VEN 168C DEV 0036
Network: Broadcom BCM57786 NetXtreme PCI-E Gigabit eth. controller VEN 14E4 DEV 1683
I focused on Power Management following these two guides:
http://www.tonymacx86.com/yosemite-laptop-support/146870-guide-native-power-management-laptops.html
and this:
http://www.tonymacx86.com/mavericks...vericks-native-cpu-igpu-power-management.html
but something not working right, because Intel Power Gadget gives a CPU frequency of 0,80 Ghz, and also HW Monitor indicates 792 Mhz. Moreover I see that in History Graphs of HW Monitor there are missing Fans & Pumps and Voltages.
This is my /Extra/org.chameleon.Boot.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>No</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>IGPlatformID</key>
<string>01660009</string>
<key>Kernel Flags</key>
<string></string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>GenerateCStates</key>
<string>No</string>
<key>GeneratePStates</key>
<string>No</string>
<key>UseKernelCache</key>
<string>Yes</string>
<key>DropSSDT</key>
<string>Yes</string>
<key>Graphics Mode</key>
<string>1366x768x32</string>
</dict>
</plist>
and /Extra/smbios.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>SMbiosdate</key>
<string>05/10/12</string>
<key>SMbiosvendor</key>
<string>Apple Inc.</string>
<key>SMbiosversion</key>
<string>MBA51.88Z.00EF.B00.1205221442</string>
<key>SMboardproduct</key>
<string>Mac-2E6FAB96566FE58C</string>
<key>SMfamily</key>
<string>MacBook Air</string>
<key>SMmanufacturer</key>
<string>Apple Inc.</string>
<key>SMproductname</key>
<string>MacBookAir5,2</string>
<key>SMserial</key>
<string>C02KV268DRVC</string>
<key>SMsystemversion</key>
<string>1.0</string>
</dict>
</plist>
attachments: HW Monitor screenshots, DSDT.aml, SSDT.aml, and IOReg file acer_e1_570g.
What's wrong with my configuration?
Thanks for any help!