Acer Aspire 4470-332G32Mn Post Install

[trigger-happy]

Hello guys, I've finally managed to get my intended laptop setup to work. It's a triple boot setup with OS X 10.6.3, Windows 7 x64 and Fedora 13 x64. I'm having some issues with regards to graphics acceleration and audio on the Mac side of things though and I'd like to ask for some help regarding that.

For graphics acceleration, I'm not sure how I should turn that on.
For audio, there's none D:

Here's my lspci output from Fedora 13:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M] (rev a2)
01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

Thanks

Oh and if anyone is interested on how to get the same triple boot setup to work, I can come up with a guide somewhere in this forum (still new so I don't know where to shove it in)

 

[NS_mac]

Have a look my posting here: NVenabler
http://forum.eeeuser.com/viewtopic.php?id=86078

 

[trigger-happy]

Thanks for the reply. Truth is I didn't really check if I did have graphics acceleration enabled before I posted this thread (I was lacking sleep from setting up the triple boot system). I did a check just now and found out that it's already enabled. That pretty much scratches graphics acceleration from the list of things to do. I'd really appreciate any help on getting the sounds working though

 

[surfstu]

@NS_mac

are you using the intel HD as your graphics?

I have intel HD and a 310m 1Gb in my laptop, SL 10.6.3 is only finding the intel HD and I am getting no quartz etc so cannot run many of my programs....

any advice on how I should go about this?

Stuart

 

[surfstu]

anyone?

I've got into SL 10.6.3, macbook pro1.3 updates panics near end of update as does 10.6.4.

my k52jc laptop is recoqnised as macbook pro6, and I have the macbook pro supported kernal installed as provided by multibeast (thanks). Finally I have nvidia in preferences, but on a pcie bus (no memory status showing) and I believe the laptop screen is running from intel as provided by the i5 intel gpu.

so no quartz etc and therefore no logic.... please please help....

Is there some way of switching the port used for gpu?

cheers stuart