- Joined
- Dec 23, 2012
- Messages
- 9
- Motherboard
- Hackintosh G5
- CPU
- G2020
- Graphics
- GT640
- Mac
- Classic Mac
- Mobile Phone
I have wanted to build a G4 cube ever since I finished my G5. I am however an old fart on a very tight budget. It takes me quite a while to build a project because I generally can buy one or two parts every month. As luck would have it I won an auction on eBay for dead G4 Cube for only $5.50 plus shipping.The seller included an Apple wireless keyboard that was not even mentioned in the ad. When I opened the box I was flabbergasted. It was probably one of my best buys on eBay in fifteen years.
Now that I had the Cube I had to start the project. I disassembled it entirely and sold some of the parts on eBay. In essence I got the Cube for free and made a few bucks. I read every post I could find about G4 cube builds. I got a lot of good ideas and inspiration from the builds on this site.
I was perplexed about which motherboard to chose. I knew I wanted a Gigabyte ITX board but that was my one criteria. After studying the layout of many different boards I settled on the Gigabyte GA B85N Phoenix WiFi. I choose it for it's layout and price. I don't think I could have chosen a better board. The built in WiFi and bluetooth don't work. I will need to replace at some point with a broadcom card The only inconvenient connector was for the Sata II plug that was not needed anyway.
I bought a 160 watt Pico PSU again from eBay and started building and thinking. I think in a way it was good that I had to wait for some parts because I spent a lot of time staring at my progress and fitting parts in different place. The 2.5 hard drive fit perfectly into a little niche on the side like it was designed to fit. I chose to mount the motherboard upside-down with the cpu fan pointing inward using four long bolts. I had to bend a slight dog leg into in two of them.
I re-used the touch sensor using directions found here. Basically one wire to pin 9 on the 24 pin and a ground. I clipped out the stock led and slid a blue led in its place and plugged the pigtail to the motherboard pins. I worked perfect the first time I also used a blue led behind the apple on the front. It glows for a hdd activity light
I choose the Intel I3 4360 for it's low power consumption and price. I found the Rosewill Z775 low profile cpu cooler and fan to fit perfectly with a quarter inch to spare. I mounted a 120 mm led fan where the HDD used to reside. It helps keep the inside nice and cool
The only part I am not happy with is the backplate I had to craft from a sheet of aluminum. All I have is Dremel and a few small files. I bought some chrome stickers to snazz it up. but it still bugs be. I will probably make another at some point.
I was able to install Yosemite to the 2.5 hdd and it runs perfect I still want to install an msata and a dvd then it will be done, or maybe it will never be done
The total cost was a little above $300 but I already owned the hard drive and memory. They will be replaced with ssd and two low profile sticks of eight gbs
I really need some advise on how to read the cpu temps. Every solution I have found either does not work or cost money for an app. I don't understand why Yosemite doesn't just display the cpu temp in About This Mac. Am I missing something, my father always said I wasn't the sharpest crayon in the box!
Also what would be a good choice to replace the non-functioning Intel WiFi/Bluetooth. I can live without BT as I bought a neat little BT4 dongle from eBay for 4 bucks
Now that I had the Cube I had to start the project. I disassembled it entirely and sold some of the parts on eBay. In essence I got the Cube for free and made a few bucks. I read every post I could find about G4 cube builds. I got a lot of good ideas and inspiration from the builds on this site.
I was perplexed about which motherboard to chose. I knew I wanted a Gigabyte ITX board but that was my one criteria. After studying the layout of many different boards I settled on the Gigabyte GA B85N Phoenix WiFi. I choose it for it's layout and price. I don't think I could have chosen a better board. The built in WiFi and bluetooth don't work. I will need to replace at some point with a broadcom card The only inconvenient connector was for the Sata II plug that was not needed anyway.
I bought a 160 watt Pico PSU again from eBay and started building and thinking. I think in a way it was good that I had to wait for some parts because I spent a lot of time staring at my progress and fitting parts in different place. The 2.5 hard drive fit perfectly into a little niche on the side like it was designed to fit. I chose to mount the motherboard upside-down with the cpu fan pointing inward using four long bolts. I had to bend a slight dog leg into in two of them.
I re-used the touch sensor using directions found here. Basically one wire to pin 9 on the 24 pin and a ground. I clipped out the stock led and slid a blue led in its place and plugged the pigtail to the motherboard pins. I worked perfect the first time I also used a blue led behind the apple on the front. It glows for a hdd activity light
I choose the Intel I3 4360 for it's low power consumption and price. I found the Rosewill Z775 low profile cpu cooler and fan to fit perfectly with a quarter inch to spare. I mounted a 120 mm led fan where the HDD used to reside. It helps keep the inside nice and cool
The only part I am not happy with is the backplate I had to craft from a sheet of aluminum. All I have is Dremel and a few small files. I bought some chrome stickers to snazz it up. but it still bugs be. I will probably make another at some point.
I was able to install Yosemite to the 2.5 hdd and it runs perfect I still want to install an msata and a dvd then it will be done, or maybe it will never be done
The total cost was a little above $300 but I already owned the hard drive and memory. They will be replaced with ssd and two low profile sticks of eight gbs
I really need some advise on how to read the cpu temps. Every solution I have found either does not work or cost money for an app. I don't understand why Yosemite doesn't just display the cpu temp in About This Mac. Am I missing something, my father always said I wasn't the sharpest crayon in the box!
Also what would be a good choice to replace the non-functioning Intel WiFi/Bluetooth. I can live without BT as I bought a neat little BT4 dongle from eBay for 4 bucks
Attachments
-
IMG_20141220_164813.jpg916.9 KB · Views: 266
-
IMG_20141220_164751.jpg585 KB · Views: 296
-
IMG_20141220_164727.jpg883.9 KB · Views: 316
-
IMG_20141220_165138.jpg971.9 KB · Views: 293
-
IMG_20141220_165459.jpg727.7 KB · Views: 408
-
IMG_20141220_211416.jpg514.7 KB · Views: 287
-
IMG_20141220_211500.jpg678.7 KB · Views: 298
-
IMG_20141220_211825.jpg696.7 KB · Views: 340
-
IMG_20141220_211854.jpg877.4 KB · Views: 305
-
IMG_20141220_212007.jpg705.7 KB · Views: 317
-
IMG_20141224_144608.jpg846.7 KB · Views: 302
-
IMG_20141224_144957.jpg613.1 KB · Views: 343
-
IMG_20141224_145224.jpg520.4 KB · Views: 337
-
IMG_20141224_145303.jpg931.1 KB · Views: 332
-
IMG_20141224_145321.jpg635.1 KB · Views: 301
-
IMG_20141224_145552.jpg898.2 KB · Views: 282
-
IMG_20141224_145607.jpg868.9 KB · Views: 291
-
IMG_20141224_145723.jpg867.7 KB · Views: 293
-
IMG_20141224_145807.jpg794.4 KB · Views: 335
-
IMG_20141224_150244.jpg759.1 KB · Views: 306
-
IMG_20141224_145921.jpg888.5 KB · Views: 300
-
IMG_20141224_145906.jpg932.7 KB · Views: 280