UtterDisbelief
Moderator
- Joined
- Feb 13, 2012
- Messages
- 9,587
- Motherboard
- Gigabyte B760 Gaming X AX
- CPU
- i5-14600K
- Graphics
- RX 560
- Mac
- Classic Mac
- Mobile Phone
Hi and Happy New Year!
Any ideas on my issue? Thanks in advance!
Okay ... I covered a little of this in my earlier post #637.
No, the "UsbConnector type" setting will not cause the problems you are seeing. Yes, you should choose the correct ones but we can get to that later.
The two EHCI controllers are EH01 and EH02. Attached to each of these is a hub - PR01 and PR12. From these hang the USB2 ports. For your chipset there are 8+6 as you can see in IOReg. These are USB2-only ports.
The only thing I can see wrong here is that both hubs are named "PR01". Why not "PR01" and "PR12"? PR12 is present as a hub but has no ports allocated to it. Something must be causing this and so far I can't see what that is.
As you say, the XHCI controller looks fine in your IOReg.
1) Show us what kexts you have installed in EFI/ and in Library/Extensions.
2) why choose system-definition iMacPro1,1 ?