8700K UHD 630 headless 10.13.6 problem

[pastrychef]

Do you know what should I config in Graphics for my spec ?
My system is always freezing and not stable at all .
:\

You can either use iMac18,3 or iMac19,1 with IGPU configured to be headless.

Or, you can disable IGPU and use iMacPro1,1.

 

[SmallPooP]

You can either use iMac18,3 or iMac19,1 with IGPU configured to be headless.

Or, you can disable IGPU and use iMacPro1,1.

Im using right now 19,2, its for 8700 no ? and I have 8700K
and what do you mean configured to be headless ?
and Orinoco is needed ?
I'm at latest Mojave

 

[pastrychef]

Im using right now 19,2, its for 8700 no ? and I have 8700K
and what do you mean configured to be headless ?
and Orinoco is needed ?
I'm at latest Mojave

Please post your EFI folder.

iMac19,2 can work. If you use it, make sure you use one of the modded versions of USBInjectAll.kext that supports it.

Headless as in configured for no ports. Can not connect monitor to it.

Most of the time, Orinoco is not needed.

 

[SmallPooP]

Please post your EFI folder.

iMac19,2 can work. If you use it, make sure you use one of the modded versions of USBInjectAll.kext that supports it.

Headless as in configured for no ports. Can not connect monitor to it.

Most of the time, Orinoco is not needed.

I use kext updater, I don't know if usbinjectall.kext supports the 19,2 SMBIOS.
I cleared the graphics windows in clover configurator.
here's my efi folder.

 

[pastrychef]

I use kext updater, I don't know if usbinjectall.kext supports the 19,2 SMBIOS.
I cleared the graphics windows in clover configurator.
here's my efi folder.

You have all your kexts installed in /Library/Extension/... I can't tell if you are using one of the modded versions of USBInjectAll.kext.

Use IORegistryExplorer and look at the USB section to see if all your USB ports are enabled.

If you are using iMac18,x or iMac19,x, you should have IGPU enabled in BIOS with 64MB or more of RAM allocated to it. (I like to allocated 96MB or more)

 

[SmallPooP]

You have all your kexts installed in /Library/Extension/... I can't tell if you are using one of the modded versions of USBInjectAll.kext.

Use IORegistryExplorer and look at the USB section to see if all your USB ports are enabled.

If you are using iMac18,x or iMac19,x, you should have IGPU enabled in BIOS with 64MB or more of RAM allocated to it. (I like to allocated 96MB or more)

and on Graphics window ? stay clear?
because is makes the system to freeze with only cursor moving.

 

[pastrychef]

and on Graphics window ? stay clear?
because is makes the system to freeze with only cursor moving.

Yes, leave the Graphics section of your config.plist empty.

Make sure you have the latest Clover installed.

 

[SmallPooP]

Yes, leave the Graphics section of your config.plist empty.

Make sure you have the latest Clover installed.

I have the latest clover installed.
But the system is freezing with that clear graphics...

 

[pastrychef]

I have the latest clover installed.
But the system is freezing with that clear graphics...

Please try the EFI r5.0.3 folder from my Z370 build. Link is below in my signature.

 

[goldorac]

With imacpro1,1 it still crashing.....