8700k Asus Z370 O.C. fail

[pastrychef]

Good temps, i recently delid my 8700K and i'm running at 5.1 at 1345 volts. When running Cinebench i got 80C, i have Dark Rock 4 Pro with MX-4 thermal paste.

Your CPU is a lot better than mine. Mine needs more voltage to be stable.

MX-4 is your problem. Use Thermal Grizzly Conductonaut for best results.

 

[deantonibrito]

Mine is very simple.

• Enable XMP
• Sync all cores
• 1.380v vCore
• Load Line Calibration 6

I need to change the Mobo jumper (overvoltage jumper) before
I'll try it and post here.

Tks

Please share Clover cpu power management

 

[pastrychef]

I need to change the Mobo jumper (overvoltage jumper) before
I'll try it and post here.

Tks

Please share Clover cpu power management

I never had to change any jumpers on my motherboard.

All info about my build can be found in the link in my signature below.

 

[deantonibrito]

I never had to change any jumpers on my motherboard.

All info about my build can be found in the link in my signature below.

I cant change voltage.. got this message

 

[pastrychef]

I cant change voltage.. got this message

Make sure you are setting voltage in the correct field. 1.380v should not need that jumper change.

 

[deantonibrito]

Make sure you are setting voltage in the correct field. 1.380v should not need that jumper change.

I guess its here (CPU Core / Cache voltage) , right?

 

[pastrychef]

I guess its here (CPU Core / Cache voltage) , right?

Watch the follow video to get an idea of how to overclock Coffee Lake:

 

[deantonibrito]

tks man!!! i will!!!

 

[JimmakoS]

Your CPU is a lot better than mine. Mine needs more voltage to be stable.

MX-4 is your problem. Use Thermal Grizzly Conductonaut for best results.

For the delete i used coollaboratory liquid ultra. Between the IHS and cpu cooler witch paste do you use?

 

[pastrychef]

For the delete i used coollaboratory liquid ultra. Between the IHS and cpu cooler witch paste do you use?

I use Thermal Grizzly Conductonaut between the CPU die and IHS. Then I use Thermal Grizzly Conductonaut again between IHS and heatsink.

From my experience, Conductonaut performs a little better but Coollaboratory Liquid Ultra is a lot easier to apply.