- Joined
- Aug 9, 2018
- Messages
- 13
- Motherboard
- Asus P9X79
- CPU
- i7-3930k
- Graphics
- Sapphire Radeon R9 380
- Mac
Procesor: i7-3930k
MB: Asus p9x79
Video: Sapphire Radeon R9 380
Clover 5108
EFI Atached, and screenshots with kexts.
My problem:
My video card can't output on 3 monitors, only on two. I have 4 ports (2dvi, 1 hdmi, 1 displayport). I've tried all of them, when i connect the third monitor, doesn't work.
On windows all 3 monitors work.
I've tried Lagotto framebuffer but no change (even with radeondeinit). On system report on framebuffer is empty even if i load the framebuffer in clover.
Everytime i connect the 3'rd monitor, no display, but if i connect one by one, works on every port.
On DPCI manager the card isn't showing. But if i run Geekbench the results are ok.
I've tried with inject fake id "0x69391002: Tonga PRO ( Radeon R9 285 / 380 )" but that also didn't work.
I have a second card (evga gtx 680 2gb, with 2 dvi, 1 hdmi, 1 dislayport) and all 3 monitors works without problems.
Also in idle, the fans are acting weird (40Celsius). Starts and stops at a very short period of time (5 second on, 5 second off). But that isn't a problem, only in time the bearings can suffer i think
). My priority is to output to the 3'rd display.
MB: Asus p9x79
Video: Sapphire Radeon R9 380
Clover 5108
EFI Atached, and screenshots with kexts.
My problem:
My video card can't output on 3 monitors, only on two. I have 4 ports (2dvi, 1 hdmi, 1 displayport). I've tried all of them, when i connect the third monitor, doesn't work.
On windows all 3 monitors work.
I've tried Lagotto framebuffer but no change (even with radeondeinit). On system report on framebuffer is empty even if i load the framebuffer in clover.
Everytime i connect the 3'rd monitor, no display, but if i connect one by one, works on every port.
On DPCI manager the card isn't showing. But if i run Geekbench the results are ok.
I've tried with inject fake id "0x69391002: Tonga PRO ( Radeon R9 285 / 380 )" but that also didn't work.
I have a second card (evga gtx 680 2gb, with 2 dvi, 1 hdmi, 1 dislayport) and all 3 monitors works without problems.
Also in idle, the fans are acting weird (40Celsius). Starts and stops at a very short period of time (5 second on, 5 second off). But that isn't a problem, only in time the bearings can suffer i think
). My priority is to output to the 3'rd display.
