- Joined
- Aug 7, 2011
- Messages
- 33
- Motherboard
- GA-Z87N-WIFI
- CPU
- Core i7-4770K
- Graphics
- HD4600
- Mac
- Classic Mac
- Mobile Phone
hey guys, i have a couple of questions. a few of them are already in this forum, but i concentrate them here now.
my system:
Core i7-4770K - GA-Z87N-WIFI - HD4600
(this is a pc from the buyers guide)
--------------------------------------------------
Video:
i have 3 displays.
1 monitor connected via DVI
1 monitor connected via HDMI
1 TV connected via HDMI
Problems:
- Mac OS X only boots, if only 2 displays are connected. as you can see here, the intel hd4600 supports 3 displays:
http://ark.intel.com/products/75123/Intel-Core-i7-4770K-Processor-8M-Cache-up-to-3_90-GHz?q=4770k
- HDMI hot plug works in no case
---
with:
1 monitor connected via DVI
1 monitor connected via HDMI
Mac OS X boots, the monitor connected via DVI works. the monitor connected via HDMI shows no picture, but noise (see picture "bildrauschen.jpg"). after about one minute it works too. sometimes the noise stays and i have to reboot. sometimes the system freezes and i have to reset.
EDIT: i just recognized another bug: if i turn off 1 of the 2 screens the system stutters, i can't even move the mouse normally until i turn the screen on again?!
---
with
1 monitor connected via DVI
1 TV connected via HDMI
Mac OS X boots. TV only works if it was already turned ON while booting Mac OS X. otherwise if i turn it on while running Mac OS X, the system freezes and i have to reset.
---
i wish i could use all 3 displays at once without freezing etc.
as you can see here http://www.tonymacx86.com/articles/...graphics-boot-flags-chimera-6.html#post691947
i tried almost all boot flags and you can see the "results"
--------------------------------------------------
LAN:
LAN hot plug doesn't work.
--------------------------------------------------
Audio:
via LineOut: some hiccups (some other users reported this already)
via SPDIF: sometimes noise after a few minutes. restart required to fix this.
--------------------------------------------------
other problems:
i have a microsoft wireless desktop 800 http://www.amazon.de/dp/B003YL1Q3C/?tag=tonymacx8603-21
it works pretty fine on my windows pc. with the hackintosh it works fine for 2-5 minutes and then there are massive dropouts, so that i can't use it anymore. sometimes it doesn't work at all.
--------------------------------------------------
my multibeast settings:
- DSDT Free
- Drivers --> Audio --> Realtek ALCxxx --> Without DSDT --> ALC892
- Drivers --> Audio --> Realtek ALCxxx --> Without DSDT --> HDAEnabler
- Drivers --> Disk --> 3rd Party SATA
- Drivers --> Misc --> FakeSM v5.3.820
- Drivers --> Network --> Atheros --> Shailua's ALXEthernet v1.0.2
- Drivers --> Network --> Intel --> hnak's AppleIntelE1000e v2.5.4d
- Drivers --> System --> AppleRTC Patch for CMOS Reset
- Bootloaders --> Chimera v2.2.1
- Customize --> Boot Options --> Basic Boot Options
- Customize --> Boot Options --> Generate CPU States
- Customize --> Boot Options --> Hibernate Mode - Desktop
- Customize --> Boot Options --> Use KernelCache
- Customize --> Boot Options --> 1080p Display Mode
- Customize --> System Definitions --> Mac Pro --> 3,1
- Customize --> Themes --> tonymacx86 Black
hopefully someone can help me with this.
my system:
Core i7-4770K - GA-Z87N-WIFI - HD4600
(this is a pc from the buyers guide)
--------------------------------------------------
Video:
i have 3 displays.
1 monitor connected via DVI
1 monitor connected via HDMI
1 TV connected via HDMI
Problems:
- Mac OS X only boots, if only 2 displays are connected. as you can see here, the intel hd4600 supports 3 displays:
http://ark.intel.com/products/75123/Intel-Core-i7-4770K-Processor-8M-Cache-up-to-3_90-GHz?q=4770k
- HDMI hot plug works in no case
---
with:
1 monitor connected via DVI
1 monitor connected via HDMI
Mac OS X boots, the monitor connected via DVI works. the monitor connected via HDMI shows no picture, but noise (see picture "bildrauschen.jpg"). after about one minute it works too. sometimes the noise stays and i have to reboot. sometimes the system freezes and i have to reset.
EDIT: i just recognized another bug: if i turn off 1 of the 2 screens the system stutters, i can't even move the mouse normally until i turn the screen on again?!
---
with
1 monitor connected via DVI
1 TV connected via HDMI
Mac OS X boots. TV only works if it was already turned ON while booting Mac OS X. otherwise if i turn it on while running Mac OS X, the system freezes and i have to reset.
---
i wish i could use all 3 displays at once without freezing etc.
as you can see here http://www.tonymacx86.com/articles/...graphics-boot-flags-chimera-6.html#post691947
i tried almost all boot flags and you can see the "results"
--------------------------------------------------
LAN:
LAN hot plug doesn't work.
--------------------------------------------------
Audio:
via LineOut: some hiccups (some other users reported this already)
via SPDIF: sometimes noise after a few minutes. restart required to fix this.
--------------------------------------------------
other problems:
i have a microsoft wireless desktop 800 http://www.amazon.de/dp/B003YL1Q3C/?tag=tonymacx8603-21
it works pretty fine on my windows pc. with the hackintosh it works fine for 2-5 minutes and then there are massive dropouts, so that i can't use it anymore. sometimes it doesn't work at all.
--------------------------------------------------
my multibeast settings:
- DSDT Free
- Drivers --> Audio --> Realtek ALCxxx --> Without DSDT --> ALC892
- Drivers --> Audio --> Realtek ALCxxx --> Without DSDT --> HDAEnabler
- Drivers --> Disk --> 3rd Party SATA
- Drivers --> Misc --> FakeSM v5.3.820
- Drivers --> Network --> Atheros --> Shailua's ALXEthernet v1.0.2
- Drivers --> Network --> Intel --> hnak's AppleIntelE1000e v2.5.4d
- Drivers --> System --> AppleRTC Patch for CMOS Reset
- Bootloaders --> Chimera v2.2.1
- Customize --> Boot Options --> Basic Boot Options
- Customize --> Boot Options --> Generate CPU States
- Customize --> Boot Options --> Hibernate Mode - Desktop
- Customize --> Boot Options --> Use KernelCache
- Customize --> Boot Options --> 1080p Display Mode
- Customize --> System Definitions --> Mac Pro --> 3,1
- Customize --> Themes --> tonymacx86 Black
hopefully someone can help me with this.