2 Graphics cards

[np112983]

Hello everyone,
So I recently installed a second graphics card(GTX 710). For whatever reason, I cannot get beyond the sign in screen in normal mode. I type the password and the desktop loads but then immediately jumps back to the password screen. Everything works fine if I boot into safe mode, but clearly the graphics aren't functioning. I have bot cards installed and working with Windows 10 and Ubuntu 18.4 on the same rig. The Main monitor is hooked up via HDMI to the 710 while the other two are via DVI to the 580. Been messing around with clover setting for a week now and can't seem to figure it out. Someone help.

 

[Gigamaxx]

Hello everyone,
So I recently installed a second graphics card(GTX 710). For whatever reason, I cannot get beyond the sign in screen in normal mode. I type the password and the desktop loads but then immediately jumps back to the password screen. Everything works fine if I boot into safe mode, but clearly the graphics aren't functioning. I have bot cards installed and working with Windows 10 and Ubuntu 18.4 on the same rig. The Main monitor is hooked up via HDMI to the 710 while the other two are via DVI to the 580. Been messing around with clover setting for a week now and can't seem to figure it out. Someone help. View attachment 336350 View attachment 336351 View attachment 336352 View attachment 336353 View attachment 336350 View attachment 336351 View attachment 336353

Have you tried reversing the slots?

Before we had full support for RX cards we needed either IGPU or a Nvidia helper card as primary display. We put Nvidia card in slot 0 and RX in slot 1 positions.

 

[np112983]

Unfortunately basically everything in my rig is liquid cooled so the hoses are kind of blocking the main card from being moved. I’d have to drain the entire system and reconfigure them. Rather not do that unless absolutely necessary. I did however move the newer card which is not liquid cooled to a different slot but the result was the same. Thanks for the advice though.