- Joined
- Apr 24, 2013
- Messages
- 6
- Motherboard
- Gigabyte GA-Z77-DS3H-F9 rev1.0
- CPU
- i5-3570K
- Graphics
- HD 4000
- Mobile Phone
Hi there, need your help!
I have made Unibeast installation USB key on 10.6.8 MacPro succesfully. Then I was able to boot up from USBkey on PC, also installed MountainLion on SSD and then when trying to bootu from the SSD, it's possible only in safe mode.
-v (verbose mode end with):
What's wrong and how should I continue??
EDIT:
OK, I made a new UniBeast install USB with 10.8.2 and everything is pretty easy.
My biggest problem is, that I run VGA monitor, so the HD4000 is not working through it and I have to also check GraphicsEnabler=No in latest MultiBeast 5.3.0. It writes these rows in Extra/Org.chameleon.Boot.plist
<key>GraphicsEnabler</key>
<string>No</string>
So now I have fully functional system, but without graphic acceleration.
If someone can provide step by step instruction, how to get working VGA output with GraphicsEnabler=Yes with this CPU and MOBO, it would be great.
I have made Unibeast installation USB key on 10.6.8 MacPro succesfully. Then I was able to boot up from USBkey on PC, also installed MountainLion on SSD and then when trying to bootu from the SSD, it's possible only in safe mode.
-v (verbose mode end with):
Code:
...
...
BootCacheControl: Unable to open /var/db/BootCache.playlist: 2 No such file or directory
Waiting for DSMOS...
Previous Shutdown Cause: 3
macx_swapon SUCCES
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformPluginUntil : getCPUIDInfo: this is an unknown CPU model 0x3a
-- power management may be incomplete or unsupported
DSMOS has arrived
[IOBluetoothHCIController][start] -- completed
What's wrong and how should I continue??
EDIT:
OK, I made a new UniBeast install USB with 10.8.2 and everything is pretty easy.
My biggest problem is, that I run VGA monitor, so the HD4000 is not working through it and I have to also check GraphicsEnabler=No in latest MultiBeast 5.3.0. It writes these rows in Extra/Org.chameleon.Boot.plist
<key>GraphicsEnabler</key>
<string>No</string>
So now I have fully functional system, but without graphic acceleration.
If someone can provide step by step instruction, how to get working VGA output with GraphicsEnabler=Yes with this CPU and MOBO, it would be great.