10.8.3+Clover+ALC898

[Sofos]

Hello. I would first like to thank toleda for the work and to apologize for my bad English.

I'm install you kext for alc898 from the MultiBeast (Whithout DSDT) and get the problem. Soundcard is going down after ~30s omission, the speakers there is a characteristic noise. And it's «ON» again if someone accesses it, play some sound. Can you fix it please?

My specs: ML 10.8.3 - Clover_v2_r1193
GIGABYTE GA-Z77X-UD5H + Intel Core i7-3770K + 32 Gb DDR3 1600MHz(4x8Gb)+ Nvidia GTX 680 2Gb / Realtek ALC898 / SSD Vertex 4 256GB + HDD 1.5TB + HDD 3TB
Apple Wireless Keyboard / Apple Magic Mouse - gembird btd-mini2
Apple LED Cinema Display 27"

 

[epoon2]

widely reported, normal behavior of 898. chip goes to sleep and causes pop sounds every few seconds.

use the black port instead.

 

[toleda]

widely reported, normal behavior of 898. chip goes to sleep and causes pop sounds every few seconds.

Not normal for 898; one of many OS X audio problems specific to the Z77X-UD5H_v1.0.

 

[Sofos]

By the way, with Chimera+NullCPUPowerManagement etc (MB EasyInstall) - no problem with ALC898.

 

[toleda]

By the way, with Chimera+NullCPUPowerManagement etc (MB EasyInstall) - no problem with ALC898.

Completely unrelated topics. Why would you run a 3770K with no CPU Power Management?

 

[epoon2]

Not normal for 898; one of many OS X audio problems specific to the Z77X-UD5H_v1.0.

you are correct. It's specific to UD5H, which I forgot to clarify. I'd like to add - Rev 1.1 board also has the same issue.

 

[Sofos]

Completely unrelated topics. Why would you run a 3770K with no CPU Power Management?

Normal sleep and native speedstep good work with native power management.