- Joined
- Feb 2, 2012
- Messages
- 24
- Mac
- Classic Mac
- Mobile Phone
It was suggested I repost this in it's own thread...
*Edit - Short answer: Use UniBeast version 1.1.0 with Lion 10.7.3
*Edit - Secondary issue (language screen loads background only - no dialogue window appears. The computer just sits there.): My hardware setup required the use of boot code "PCIRootUID=0" to fix this issue.
*Edit - OS installation a success Running Multibeast now.
*Edit - will post any further issues or final success (OS X installation proceeding normally now)
First day building my first Hackintosh - Picked a fine time to try it lol. New OS X Lion and first time trying.
My build -
CPU: Intel Cor i7-2600K @ 3.40GHz (default)
Motherboard: Asus P8Z68-V LX
RAM: Kingston HyperX DDR3 4GB 1333Mhz in slot 1 (Removed 2nd stick for installation process)
Hard Drive: Hitachi 750GB sata plugged into Sata 1 3 GB/s
Video Card: ATI Radeon 4870 512MB
USB Thumbdrive: Centon 8GB
Bought 10.7.3 on App Store - downloads to application folder
Downloaded Unibeast
Downloaded Multibeast
Built USB Thumbdrive successfully
Double checked BIOS settings:
Sata is AHCI Mode (default)
High Precision Timer is Enabled (default)
Boot order is set to USB thumbdrive first
I crossed my fingers and proceeded with boot up. Got to the Chameleon(?) boot screen to select my USB thumbdrive to boot.
Did so...and got a kernel panic
and the same result for each of the following
1) -v -x -f
2) PCIRootUID=1 (I notice that this is already set in the Boot args when I look at the crash log)
3) PCIRootUID=0
4) GraphicsEnabler=No
5) GraphicsEnabler=Yes
6) -s
7) -x
8) -v npci=0x2000 PCIRootUID=1
So, in short, I haven't gotten to the installation screen yet, let alone multibeast.
In BIOS, I have also tried turning off
1) Realtek LAN
2) Audio
3) USB 3
The recurring message is
...
[RealtekRTL81xx:init] init completed
panic(cpu 2 caller 0xffffff80005dfb2a): "IOUSBDevice::_RESERVEDIOUSBDevice13 called. "@/SourceCache/xnu/xnu-1699.24.23/libkern/c++/OSMetaClass.cpp:907
...
Kernel Extensions in backtrace:
com.apple.driver.AppleUSBComposite(4.5.8)...
So, my 3 questions are:
1) anybody else using Asus motherboard?
2) anybody try making a new Unibeast with 10.7.3 and successfully installing it?
3) anybody got any ideas for me try?
Second Day...
I saw that UniBeast is updated to 1.1.0 and that someone successfully installed 10.7.3. I just gave it shot. I'm able to get past the initial kernel panic problem from yesterday, but...
I'm stuck on the language selection page - I get the grey background indicating this is the language page, but the language selection menu does not appear. I only see the background.
Trying the different boot codes now...
Anyone else with an Asus motherboard try this yet?
*edit - PCIRootUID=0 got me to the functioning language screen! Will post any new issues or final results next...
*Edit - Short answer: Use UniBeast version 1.1.0 with Lion 10.7.3
*Edit - Secondary issue (language screen loads background only - no dialogue window appears. The computer just sits there.): My hardware setup required the use of boot code "PCIRootUID=0" to fix this issue.
*Edit - OS installation a success Running Multibeast now.
*Edit - will post any further issues or final success (OS X installation proceeding normally now)
First day building my first Hackintosh - Picked a fine time to try it lol. New OS X Lion and first time trying.
My build -
CPU: Intel Cor i7-2600K @ 3.40GHz (default)
Motherboard: Asus P8Z68-V LX
RAM: Kingston HyperX DDR3 4GB 1333Mhz in slot 1 (Removed 2nd stick for installation process)
Hard Drive: Hitachi 750GB sata plugged into Sata 1 3 GB/s
Video Card: ATI Radeon 4870 512MB
USB Thumbdrive: Centon 8GB
Bought 10.7.3 on App Store - downloads to application folder
Downloaded Unibeast
Downloaded Multibeast
Built USB Thumbdrive successfully
Double checked BIOS settings:
Sata is AHCI Mode (default)
High Precision Timer is Enabled (default)
Boot order is set to USB thumbdrive first
I crossed my fingers and proceeded with boot up. Got to the Chameleon(?) boot screen to select my USB thumbdrive to boot.
Did so...and got a kernel panic
and the same result for each of the following
1) -v -x -f
2) PCIRootUID=1 (I notice that this is already set in the Boot args when I look at the crash log)
3) PCIRootUID=0
4) GraphicsEnabler=No
5) GraphicsEnabler=Yes
6) -s
7) -x
8) -v npci=0x2000 PCIRootUID=1
So, in short, I haven't gotten to the installation screen yet, let alone multibeast.
In BIOS, I have also tried turning off
1) Realtek LAN
2) Audio
3) USB 3
The recurring message is
...
[RealtekRTL81xx:init] init completed
panic(cpu 2 caller 0xffffff80005dfb2a): "IOUSBDevice::_RESERVEDIOUSBDevice13 called. "@/SourceCache/xnu/xnu-1699.24.23/libkern/c++/OSMetaClass.cpp:907
...
Kernel Extensions in backtrace:
com.apple.driver.AppleUSBComposite(4.5.8)...
So, my 3 questions are:
1) anybody else using Asus motherboard?
2) anybody try making a new Unibeast with 10.7.3 and successfully installing it?
3) anybody got any ideas for me try?
Second Day...
I saw that UniBeast is updated to 1.1.0 and that someone successfully installed 10.7.3. I just gave it shot. I'm able to get past the initial kernel panic problem from yesterday, but...
I'm stuck on the language selection page - I get the grey background indicating this is the language page, but the language selection menu does not appear. I only see the background.
Trying the different boot codes now...
Anyone else with an Asus motherboard try this yet?
*edit - PCIRootUID=0 got me to the functioning language screen! Will post any new issues or final results next...