10.6.8 help

[Jrpsk8er]

Hi,
i have been trying to upgrade my hackintosh for a few months now sadly i have not been able to get a good install.

Motherboard:GA-X58A-UD5
CPU: i7-930 2.8Ghz
Graphic Card: PNY Nvidia 9800 GTX 512MB
Ram: 6GB 1600mhz

The only issue i have right now is that i can not use my hdmi output of my graphic card to show image. i have to use vga connection to get get any image or but to mac os 10.6.8.

1. I install mac os 10.6.3 using iboot 3.1.1.1

2. update to 10.6.8 combo

3. ran multibeast 3.9 (install the following)
—> UserDSDT
—> System Utilities -> SELECT ALL
—> Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8XX -> ALC8XXHDA
—> Drivers & Bootloaders -> Kexts & Enablers -> Audio -> Realtek ALC8XX -> AppleHDA Rollback
—> Drivers & Bootloaders -> Kexts & Enablers -> Disk -> JMicron36x (aka GSATA) -> JMicron36xSATA
—> Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> FakeSMC
—> Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> FakeSMC Plugins
—> Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> USB 3.0 – NEC/Renesas
—> Network -> Linx2Mac’s RealtekRTL81xx Ethernet —> Drivers & Bootloaders -> Bootloaders -> Chimera v1.5.4 r1394
—> OSx86 Software -> Select All
—> Customization -> Boot Options -> 64-bit Apple Boot Screen
—> Customization -> Boot Options -> PCI Root UID Fix
—> Customization -> System Definitions -> Mac Pro -> MacPro 3,1
—> Customization -> Themes -> tonymacx86 Remixed

4.install Official NVIDIA Drivers (from the downloads) http://www.tonymacx86.com/viewforum.php?f=125

5. i have to boot by using "-f"

Hardware Overview:

Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Intel Core i7
Processor Speed: 2.83 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 6 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MultiBeast.tonymacx86.com
SMC Version (system): 1.30f3
Serial Number (system): G88451235J4
Hardware UUID: 0F526ADD-E7C8-5247-A3B0-FB1B5E6174AE

GeForce 9800 GTX+:

Chipset Model: GeForce 9800 GTX+
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0613
Revision ID: 0x00a2
ROM Revision: 62.92.89.00.51
Displays:
Display Connector:
Status: No Display Connected
DELL ST2310:
Resolution: 1152 x 864 @ 75 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: P480R9BC0Y4L
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported

My smbios.plist is
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>npci=0x2000 PCIRootUID=1</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
</dict>
</plist>

Plz help me
thank you

 

[Going Bald]

On 10.6 you should not need either the npci flag or the PCIRoot flag on an X58A-UD5.
In your boot.plist, try changing

<key>Kernel Flags</key>
<string>npci=0x2000 PCIRootUID=1</string>

to

<key>Kernel Flags</key>
<string></string>

and see if that improves matters.