- Joined
- Apr 15, 2018
- Messages
- 57
- Motherboard
- ASUS ROG STRIX Z370-G GAMING (Wi-Fi AC)
- CPU
- i7-8700K
- Graphics
- GTX 1070 Ti
- Mac
- Classic Mac
- Mobile Phone
Hello all:
I have a Sonnet 10G card in my Hackintosh, that has the Aquantia AQC-107S chipset. (https://www.sonnettech.com/product/solo10g-pcie-card.html ). If I recall, this is the same chipset found in the newer iMac Pros.
In my original 10.13.4 build, and now my 10.13.6 updated, I see odd behavior:
Name: AppleEthernetAquantiaAqtion
Find: 6275696C 742D696E
Replace: AABBCCDD AABBCCDD
Comment AQC 107 10 GbE v2
Match OS {EMPTY}
Match Build {EMPTY}
Disabled / infoPlistPatch (both unchecked)
System Prefs Report:
Aquantia AQC107:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x1d6a
Device ID: 0x87b1
Subsystem Vendor ID: 0x16b8
Subsystem ID: 0x7300
Revision ID: 0x0002
Link Width: x4
BSD name: en1
Kext name: AppleEthernetAquantiaAqtion.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleEthernetAquantiaAqtion.kext
Version: 1.0.55
I've tried various switches, different cables and ports, with no luck. Any suggestions? Thanks!
I have a Sonnet 10G card in my Hackintosh, that has the Aquantia AQC-107S chipset. (https://www.sonnettech.com/product/solo10g-pcie-card.html ). If I recall, this is the same chipset found in the newer iMac Pros.
In my original 10.13.4 build, and now my 10.13.6 updated, I see odd behavior:
- Every reboot, the connection is negotiated to 110BaseTX (100Mbps). This happens regardless if Hardware in Mac System Prefs is set to manual (10GbaseT) or automatic. In fact, if I change the connection while the system is running (in the Mac OS system prefs or on the 10GigE NAS), the connection will reset and register as 10GigE. Yes, keeping at 1500 MTU.
- Other 10GigE devices connected to the NAS have no issues (native MacBook Pro with a 10GigE USB-C adapter, also from Sonnet)
- Periodically, the connection to the NAS will drop.
- This happens regardless of mount protocol (NFS, SMB, AFP).
- Short run Cat5e (5feet)
- Synology DS3018xs.
Name: AppleEthernetAquantiaAqtion
Find: 6275696C 742D696E
Replace: AABBCCDD AABBCCDD
Comment AQC 107 10 GbE v2
Match OS {EMPTY}
Match Build {EMPTY}
Disabled / infoPlistPatch (both unchecked)
System Prefs Report:
Aquantia AQC107:
Name: ethernet
Type: Ethernet Controller
Bus: PCI
Vendor ID: 0x1d6a
Device ID: 0x87b1
Subsystem Vendor ID: 0x16b8
Subsystem ID: 0x7300
Revision ID: 0x0002
Link Width: x4
BSD name: en1
Kext name: AppleEthernetAquantiaAqtion.kext
Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleEthernetAquantiaAqtion.kext
Version: 1.0.55
I've tried various switches, different cables and ports, with no luck. Any suggestions? Thanks!