- Joined
- Jul 23, 2015
- Messages
- 92
- Motherboard
- x99-UD4
- CPU
- 5820K
- Graphics
- RX580 8GB
- Mac
I was wondering if anyone got all their USBs working correctly and who wants to share their config and or SSDT?
Thanks
Thanks
I was wondering if anyone got all their USBs working correctly and who wants to share their config and or SSDT?
Thanks
I was wondering if anyone got all their USBs working correctly and who wants to share their config and or SSDT?
Thanks
Put this in your EFI/Clover/Kexts/Other folder and remove all kexts related to USB port limits , such as the USBInjectAll.kext and X99 injector kexts. Also, remove the clover port limit patch. This will enable all your USB 2 and 3 ports.
How's your power management with the 5820K? Are you getting good geekbench scores?
Hey, thanks for getting back... Power management was perfect with 10.14 but when I updated to 10.14.1 it won't go to sleep on its own anymore. It goes to sleep when I do it manually and awakes too but not on its own
I am not overclocking or anything... What would be a good geekbenchscore you reckon?
Cheers
Put this in your EFI/Clover/Kexts/Other folder and remove all kexts related to USB port limits , such as the USBInjectAll.kext and X99 injector kexts. Also, remove the clover port limit patch. This will enable all your USB 2 and 3 ports.
How's your power management with the 5820K? Are you getting good geekbench scores?
Hello @jasperlevi, I've tried to download your file, but it looks empty? I would be glad to have a look at it. Thanks.
WOH Thanks so much! I am trying to do my own SSDT but slowly learning.. I will try all that and get back to you!Hi @IsidoreIsou, I am attaching different versions of the kext to enable proper USB on your machine. You can use the one that matches your system definition. I am using iMac14,2 because I get best overclocking and Geekbench scores etc., also since I am still using the NVidia GTX 960. You can try the iMacPro1,1 SMBIOS. The files are very small, so they might show up as 0KB in size.
Same instructions as before: Put this in your EFI/Clover/Kexts/Other folder and remove all kexts related to USB port limits, such as the USBInjectAll.kext and X99 injector kexts. Also, remove the clover port limit patch. This will enable all your USB 2 and 3 ports.
Let me know how it goes...
WOH Thanks so much! I am trying to do my own SSDT but slowly learning.. I will try all that and get back to you!
For the moment I'm using MacPro SMBIOS.
Would you mind sharing your OC and score with iMac14,2?
And, do you have EHCI / XHCI hand off enable on your bios?
Thanks!
That's impressive numbers. I'm looking forward to OC my machine more precisely, thanks for the profile! For the moment I'm @4Ghz auto in Bios, but if I apply XMP profile with this auto OC no post, no boot. So I have to do it manually I guess.@IsidoreIsou, I'm glad to be of help! So, I'm currently overclocked to 4.5 GHz on all cores, with my Base Clock running at 125 MHz (so everything is 1.25x). Attaching my OC profile, which you can simply load in your BIOS, and get all my (BIOS) settings in one shot. EHCI and XHCI handoff are enabled in the settings.
I'm on firmware revision F24c for the GA X99 UD4, so I guess it'll help for you to also be on the same revision.
As for OC scores, I get around 26756 for multicore and 5057 single-core in geekbench 4, and around 1275 cb and ~100 fps in Cinebench 15. I think those are pretty good, and I don't get the same numbers with any other sysdef, which I think is primarily because I'm using an NVidia GTX 960, an old and unsupported video card for Macs.