- Joined
- Sep 10, 2013
- Messages
- 49
- Motherboard
- Gigabyte Z170X-UD5 TH
- CPU
- i7 6700K
- Graphics
- GTX 1050
Also, this is my current SLE after putting in new Lilu and whatever green and here are the drivers currently active in clover:
Web drivers are matched to OS build numbers, you must install the correct version.Do you have suggestions on how to get the GTX 1050 working?
graphics still appears to be laggy and broken
Thanks for this. I tried all of this...it seems my motherboard does need NVRAM emulation so I made sure that driver was there, I have the correct webdrivers installed (and reinstalled them using the script you suggested, nv_disable=1 is not being used, Nvidiaweb=true is there (via clover configurator), I added csractiveconfig=0x67, and as previously discussed I added the latest versions of the Lilu.kext and whatevergreen.kext. Despite all this, and several hours of reading and testing, while I can get it to boot in on the Nvidia web drivers, the graphics aren’t working. Only the IGFX monitor is detected and the graphics are lagging and garbled (as in the past before I’d apply the web driver fixed). That said, in system report under graphics, the Nvidia card is detected...it’s just not putting anything out to it’s monitors.Dependencies :
1. Native NVRAM support or an emulation of same - Test
2. At least 10.12.4.
3. The correct web drivers matched to the OS build number.
4. No use of nv_disable=1.
5. NvidiaWeb=true in config.plist.
6. May need SIP fully disabled - CsrActiveConfig=0x67.
7. May need latest Lilu.kext and WhatEverGreen.kext.
That is not your /EFI folder, it looks like the contents of an EFI partition that does not have Clover installed on it.Here is my zipped EFI folder.